Gaggia 加热元件 5000W 230/400V
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
此页面上的加热元件适用于各种 Gaggia 3 组浓缩咖啡机。 比如Gaggia E90和D90。
该加热元件在 220/400V 下产生 5000W 的功率,并具有 6 个连接端子。 元件的浸入长度为450mm。 法兰直径为75/53mm,孔间距为43mm。
该元件上使用的加热元件垫片是外径为50mm,内径为40mm,厚度为2mm的扁平聚四氟乙烯垫片。
详细信息
- 水下长度
- 450mm
- 电压
- 220/400V
- 瓦
- 5000W
- Gaggia
- E90
- 类型部分
- 加热元件
- 牌
- Gaggia
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.