Motor

几乎在所有情况下,这都意味着您需要更换电机电容器。意式咖啡机的电机总是单相电机,因此需要电机启动电容器才能工作。如果电容器坏了,电机就无法启动。如果电容器确实坏了,您可以用万用表测量。如果是这样,您就需要更换意式咖啡机电机电容器。请务必确保电容的微法拉值正确,如果太小,您的电机也无法启动。

这表明电容器坏了,需要更换。这样做的好处是价格相对较低。

如果您已经更换了正确的微法电容器,但仍然无法正常工作。您首先需要检查电机是否通电。如果是这样,很可能是泵电机坏了,需要更换。

Pumps

那么您就很有可能需要更换整个泵。振动泵的优点是价格并不昂贵。

您无法调整Ulka 振动泵的泵压。

调整流体技术泵的泵压非常简单。松开泵侧面的锁紧螺母。现在您可以移动调节螺丝。向内拧螺丝时,泵的压力会增加;向外拧螺丝时,泵的压力会降低。不要忘记拧紧锁紧螺母!

不,它们不尽相同。最常见的是方形轴,大多数意式咖啡机品牌都使用这种轴。但如果您使用的是 Gruppo Cimbali 的意式咖啡机,您会发现有多种型号。最常见的是D 型小方轴

这一点与泵轴相同。 标准泵用不锈钢夹具夹在电机法兰上。但 Gruppo Cimbali 意大利浓缩咖啡机上使用的泵是用螺栓固定在电机法兰上的。可以是 3 孔法兰,也可以是 2 螺栓型号。

这些泵不能改造。也没有适用于这些泵的改造套件

在 Fluid o tech、Procon 和 Nuert 等泵上主要可以找到 3/8" BSP-G 螺纹,但也可以找到 3/8" NPT 螺纹。为此,需要使用特殊的接头,即黄铜 3/8" 外螺纹接头,而对于 NPT 型号,则需要使用带有 3/8" BSP 的 3/8" NPT 外螺纹 接头

这主要取决于您的意式浓缩咖啡机有多少个冲煮组。有 3 种泵:50、100 和 200 升/小时泵。对于单组和较小的 2 组意式咖啡机,您可以使用 50 或 100 升泵。如果您有两个以上的冲煮组,则需要使用 180-200 升/小时的泵。从价格上看,这些泵型之间没有差别。

Solenoid valves

There are in total 4 manufacturers of solenoid valves, ODE, ASCO, Lucifer and Parker. Where the brand Lucifer is part of the brand Parker.

There are 2 types used. A 3 way valve and a 2 way valve. The 2 way valve is used for controlling flows, such as a water inlet valve and a water outlet. The 3 way valve is solely used on brewing groups, where the 3rd outlet is used as a exhaust port.

This depend a bit on what brand of machine you have and where you are located. The most common voltage is 220/240V for most of the world. Where the US uses 110V coils on some of the machines, not all of them. But with brands such as Cimbali you also have 24V coils.

Well that is basically the diameter of the hole in the solenoid valve. The bigger the diameter the more water can flow true the valve.

This does depend on which model you have. In most cases you need 2 o rings. If you have the stainless steel Parker solenoid valves, these are not a option. For that you need the Parker stainless steel solenoid gasket set. These are not sold individually.