Motor
My pump motor won't start
דוקאטי Energya capacitor 10μF 450V
Duati Energya capacitor 12,5μF 450V
Duati Energya capacitor 16μF 450V
הדוכסית 14 מיקרוF capacitor
דוקאטי Energya capacitor 6μF
Nuova Simonelli/Victoria Arduino Capacitor 60uf
Ducati Energia 2,5 µF 416.10.02.64 capacitor
This is a indication of a bad capacitor, which needs replacing. The advantage of this is that they are relatively expensive.
דוקאטי Energya capacitor 10μF 450V
Duati Energya capacitor 12,5μF 450V
Duati Energya capacitor 16μF 450V
הדוכסית 14 מיקרוF capacitor
דוקאטי Energya capacitor 6μF
Nuova Simonelli/Victoria Arduino Capacitor 60uf
Ducati Energia 2,5 µF 416.10.02.64 capacitor
If you have replaced the capacitor, with the correct microfarad, and it still doesn’t work. You first need to start to check if there goes power to the motor. If this is the case it is likely that your pump motor is broken and needs replacing.
Exterior RPM מנוע 300W 220/230V
RPM מנוע טבעת 150W 230V 50/60Hz
RPM מנוע טבעת clamp 165W 230V 50Hz עם צומתbox
RPM טבעת clamp מנוע 220/240V 50/60Hz
RPM מנוע טבעת 3W 220/240V 50/60Hz
RPM מים טבעתיים מקרנים מנוע 310W 110/120V 50/60HZ
RPM תגית: ring 150W 230V CE/UL Rancilio
RPM מנוע בורג עם תיבת צומת 150W 230V
Vibiemme RPM מנוע 100W 220/230V
Pumps
Then the chance is pretty big that you need to replace the entire pump. The advantage is that vibration pumps are not really expensive.
משאבת רטט Ulka לחותer 90 מעלות
משאבת הרטט Ulka EAP5 120V
Ulka רטט משאבה EAXS5 120V עם OUTLL
משאבת Ulka Vibration Ex5 230V 50/60 הרץ עם פליז
משאבת רטט Ulka EP5 24V
משאבת הרטט Ulka EX5 24V פליזנט 50/60Hz
משאבת הרטט Ulka EX541W 120V עם פליז
You can not adjust the pump pressure on a Ulka vibration pump.
משאבת הרטט Ulka EAP5 120V
Ulka רטט משאבה EAXS5 120V עם OUTLL
משאבת Ulka Vibration Ex5 230V 50/60 הרץ עם פליז
משאבת רטט Ulka EP5 24V
משאבת הרטט Ulka EX5 24V פליזנט 50/60Hz
משאבת הרטט Ulka EX541W 120V עם פליז
Adjusting the pump pressure on a fluid o tech pump is pretty straight forward. Untighten the locking nut on the side of the pump. Now you can move the adjustment screw. When you turn the screw inwards the pump pressure increases, when you turn it outwards the pump pressure will decrease. Don’t forget to tighten the locking nut!
Fluidotech clamp טבעת משאבה 200L / H
Procon משאבת טבעת 180 L / H
Fluid o tech משאבת שומן 150 L / H
Fluid o tech משאבת טבעת 100 L / H
Fluid o tech משאבת טבעת 100 L / Hקומפקטי
Nuert מוטה מטוס 200 L / H עם מחבר צד
Procon שואב אבקה 180 L /h
Procon משאבת Flange 180 L / H עם פיר קטן
Fluid o tech משאבה Carimali 50 L/h ecobras
Fluid o tech משאבה 100 L/h ecobras
Nuert Flange משאבה Stainless פלדה 180 L / H
Procon 100 L /h La Pavoni 3/8" NPT
Procon שואב אבקה 180 L / H 3 חורים
Procon שואב אבקה 150 L /h 3/8" NPT
Nuert שואב אבקה 150 L / H קומפקטי
No they are not all the same. The most common is the square shaft, this is used with most espresso machine brands. But when you have a espresso machine of Gruppo Cimbali you will find various models. The most common ones are the D shape and the small square shaft.
With this is it is the same as with the pump shafts. The standard pumps are clamped on the flange of the motor with a stainless steel clamp. But with the pumps used on espresso machines from Gruppo Cimbali you have pumps which are bolted to the flange of the motor. This can be a 3 hole flange, or a 2 bolt model.
No these pumps can not be rebuild. There are also no rebuild kits available for these pumps
On the pumps such as Fluid o tech, Procon and Nuert you will mainly find 3/8” BSP-G threads, but you can also find 3/8” NPT threads. For this you have special fittings, that are the brass 3/8” Male fittings and for the NPT model you have the nipple 3/8” NPT Male with 3/8” BSP
This mainly depends on how many brewing groups your espresso machine has. There 3 types of pumps, a 50, 100 and a 200 L/H pump. For a single group and a smaller 2 group espresso machine you can work with a 50 or a 100 L pump. When you have more then 2 brewing groups you do need to go for a 180-200 L/H pump. Price wise there is no difference between these pump versions.
Solenoid valves
There are in total 4 manufacturers of solenoid valves, ODE, ASCO, Lucifer and Parker. Where the brand Lucifer is part of the brand Parker.
Ode 2 Way Solenoid שסתום 1/4" 1/4/230V 50/60Hz DN1,5mm
Parker 2 Way Solenoid שסתום 1/4" 1/4" DN 2,5mm 9W 220/230V 50/60Hz
Parker 2 דרך solenoid שסתום 1/8" 1/8" 230V
Parker 3 הדרך Solenoid 110V 50/60Hz
פרקר 3 Way Solenoid שסתום 220/230V
Parker 3 Way Solenoid שסתום 24V 50/60Hz
לוציפר סולנואיד 3 בסיס של 220/240V 50/60Hz
לוציפר סונואיד מסתם 2 / 1/8" 1/8" 24V AC 9W
לוציפר סונואיד שסתום 3 דרכים לבסס 115V 50/60Hz
לוציפר סודנואיד 3 דרכים לבסס 24V AC
There are 2 types used. A 3 way valve and a 2 way valve. The 2 way valve is used for controlling flows, such as a water inlet valve and a water outlet. The 3 way valve is solely used on brewing groups, where the 3rd outlet is used as a exhaust port.
This depend a bit on what brand of machine you have and where you are located. The most common voltage is 220/240V for most of the world. Where the US uses 110V coils on some of the machines, not all of them. But with brands such as Cimbali you also have 24V coils.
Well that is basically the diameter of the hole in the solenoid valve. The bigger the diameter the more water can flow true the valve.
This does depend on which model you have. In most cases you need 2 o rings. If you have the stainless steel Parker solenoid valves, these are not a option. For that you need the Parker stainless steel solenoid gasket set. These are not sold individually.