This Fluid o tech rotation pump is a more uncommon version in the world of espresso machines and only used by a selection of brands. The part is designated as a “standard” pump and the part number for this pump is PO0204FNADN0000. This pump has a NSF approval.
The espresso machine pump on this page has a flowrate of 200 L/H and is equipped with a balanced bypass. If you want to connect hoses to the in and outlet of this rotation pump you will need to install a 3/8” NPT fitting. Note: this is not a common size with Fluid o tech pumps.
The pump you see on this page is a bolt on flange pump. The motor has a flange on it with multiple boltholes. You first need to slide the motor coupling set over the shaft of the motor, line up the D shaft. Now you can slide the D shaft over the coupling and make the flange of the pump and motor flush to each other. Now you can install the 3 bolts to clamp the pump to the motor.
As mentioned before this more uses a D shaft. This shaft is round with a flat section on it. The length of this pump, without shaft, is 86,5mm.
On what kind of espresso machines can I find this model of pump? On the Faema E91, Faema E92, Faema E97, Faema E98, Faema Due and the Faema Smart.
Looking for similar items or different specifications for this Fluid o tech flange pump 200 L/h?
Explore our full range in the Faema, La Cimbali, Pump categories
*
This part is compatible to the original part number. Part numbers are always leading.
The spring on this page is used a handle spring on a variety of espresso machine models manufactured by the Cimbali group. This spring keeps pressure on the internals of the handle which hold the handle in place.
The Cimbali part number for this item is 485-154-000 and the Casadio part number is 485154000
The spring itself is made from spring steel, rust...
On this page you will find a original heating element suitable for espresso machines made by the Cimbali group. You will find this heating element in brands such as Cimbali(911-544-010 ) and Faema (911544010 ) 2 group espresso machines.
This element produces 3780W at 220V, the element has 6 connecting terminals. The immersed length is 295mm.
The heating...
The item on this page is a push button for the Cimbali M29 Selectron. The Cimbali part reference number for this item are 492051000 and 492-051-000 .
This specific key is used for a single coffee long.
The touchpanel membrane on this page can be used on various espresso machine from the La Cimbali group. You can find this push button membrane on the Faema E98 RE, Casadio Quindici and the La Cimbali M27 RE.
This touchpanel has in total 1 key. This is the continuous key. You can only turn the process on or off.
Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr)
The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...
On this page you will find the touchpanel which is suitable for the La Cimbali M100 espresso machine. This touchscreen has the La Cimbali part reference 949-861-010. The touchscreen is one part with the plastic chrome plated housing.
Check for availability seen this item is not always in stock.
The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013.
This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
On this product page you will find a level probe for various La Cimbali and Faema espresso machine models. The level probes used on La Cimbali espresso machine boilers are different then most. The Cimbali part number for this item is 913-786-010 and for Faema the part number is 913786010.
The level probe itself has a male fitting of 1/8” BSP-G. The length...
