Filter by
Price
Type part
more... less
Type
Filter

Carimali coffee machine parts

The espresso machine manufacturer Carimali was found just after the 1st world war in Milan. The model type commonly made in those periods where the vertical column espresso machines. Examples from this are a Carimali Type 41 from 1935. A other good example, this is already after the 2nd world war. A lever espresso machine named the Carimali Murano Kristal.

After the 60ies when Carimali introduced a fully automatic machines, like the Carimali Vega. From this point on this was a key part of business for Carimali. Carimali only made commercial espresso machines and still does. Carimali is one of the few Italian companies who makes such a big assortment of Fully automatic espresso machines. Models like: Carimali F22, Carimali Optima Ultra, Carimali Optima Soft and a lot more.

Carimali still produces a lot of traditional espresso machines, like the Carimali DivaPRO, Carimali Kicco, Carimali Bubble and the Carimali Cento

This page overview has been divided into 2 categories. Carimali parts per category type and Carimali parts based on the model. On the Carimali Category page you will find a assortment of sections like: solenoid valves, heating elements, flowmeters, electronics and a lot more.

On the La Carimali model page you will find a selection of carimali models like Carimali E9, Carimali Tema, Carimali Pratica, Carimali Etabeta, Carimali Kicco, Carimali Systema, Carimali Eco and the Carimali Uno.

If you are unable to find the parts for your La Carimali espresso machine please send us a message. And we might be able to help you.

Carimali espresso machine parts| Brooks-parts.com

Safety valve 3/8"m - 1.9 bar CE / PED

The boiler safety valve on this page can be found on various models of La Carimali. The La Carimali part reference number for this item is 97.00148 . This safety valve has a male 3/8” thread. This valve has been calibrated on 1,9 bar. The seal inside the valve is made from FKM, when this opens there will flow out 87 kg/h of steam. The operating...
€25.60

Ode solenoid valve 3 ways 110V 50/60 Hz

On this page you will find a 110V 3 way solenoid valve made by the Italian manufacturer ODE. This specific model 31A1AR15 is made in Italy. This model is a flange solenoid valve. So it is bolted with 4 Allen bolts against a flat surface and is sealed of by 2 o rings at the bottom. In the brass body of the solenoid valve, you will find a orifice of 1,5mm....
€55.63

O ring gasket 53,34x5,33mm

The o ring on this product page can be used on various La Carimali brewing groups. This o ring can be used as a portafilter gasket for older Carimali espresso machine models such as the Carimali Systema, Carimali Eco and the Carimali Uno. The o ring has been made from EPDM. The cord diameter is 5,34mm and the internal diameter is 53,34mm. this o ring has...
€2.29

La Carimali brew group spray nozzle 30mm

the item on this product page is a OEM/Original La Carimali part. This item is a brewing group spray nozzle which is used in various Carimali brewing groups. The Carimali part reference number for this item is 22.05049.NP This brewing group spray nozzle has a outer diameter of 30mm. The hole diameter in the middle is 5mm. This item has been made in...
€34.23

bottom fitting for boiler pipe 1/2"m 1/2"m, hole 1/4"f

This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In this tube the fresh water is injected....
€13.64

Valve rod washer 18x6.4x1.6mm

The item on this product page is a M6 washer, this washer can be used on various steam and water valves. Such as the brands Marzocco, Royal, Carimali and San Remo. The Carimali part reference is 93.00058, the Marzocco reference is L165/9 and for San Remo it is 10402040. This flat washer is made from zinc plated steel, this is not a issue seen its not in...
€0.53

3 phase safety thermostat 169-18°

On this page you will find a three phase thermostat. This item is used in a variety of espresso machines. You can find this thermostat with brands like Cimbali Faema and Casadio. This 3 phase thermostat is made by the German company E.G.O. in Germany. The switching off temperature of this thermostat is 169°C and needs to be reset manually by pushing...
€69.02

La Carimali steam pipe

On this product page you will find a steam tube suitable for various La Carimali models. The Carimali part reference for this item is 02.01459.CR. This steam tube does not come with a attachment nut for the steam tube. This steam tube is a chrome plated model. The steam tip is a 1/8” BSP-G thread. The steam tip itself has 4 steam holes. This steam...
€25.60

Heating element gasket PTFE 57x43x3mm

On this page you will find a PTFE heating element gasket is suitable for a variety of brands such as Victoria Arduino, Grimac, Astoria, Faema and San Remo. This heating element gasket has a outer diameter of 57mm a inner diameter of 43mm and a thickness of 3mm. This size of gasket is suitable for a 1”1/4 screw in heating element.
€2.71

Boiler safety valve 3/8" 1.8 bar CE-PED

The boiler safety valve shown on this page can be used on wide selection of espresso brands such as Brasilia, Wega, Astoria, Grimac, Cimbali, Faema, Marzocco and Carimali. The part references can be found on the extra info tab. This boiler safety valve has a male 3/8” BSP-G thread. The safety valve has been set at 1,8 bar, this is not adjustable. When the...
€22.82

Anti vacuum valve 1/4" stainless steel

The anti-vacuum valve on this page can be used on various espresso machine models of the brand San Remo. The anti vacuum valve has the San Remo part reference of 10652040A  This anti vacuum valve has been made from stainless steel. The thread used is a male ¼” BSP-G thread. This stainless steel anti vacuum valve has been made in Italy...
€9.46