The shower screen on this page is made by the Italian company IMS Filtri, no this is not a competition shower. But they also make standard shower screens. This shower screen can be used on a variety of brewing groups. Like on the ones of Reneka, Carimali, Bezzera, Grimac, Astoria, Wega and Elektra.
The external diameter of this shower screen is 51,5mm and has a central hole which can hold a m5 screw. This screen has a circular hole pattern with holes of 2mm in diameter. Over these holes is a filter membrane installed.
This brewing group shower can be used on the Wega e61 Style brewing groups. But it requires the brewing diffuser plate with a M5 hole in the middle (WY27105000 ). With the standard one there is no bolt hole, part number WY27105
Looking for similar items or different specifications for this Shower screen 51,5mm?
Explore our full range in the Astoria, Bezzera, Brasilia categories
*
This part is compatible to the original part number. Part numbers are always leading.
In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.
But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...
This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
This ½” chrome plated stuffing nut has a central hole of 10,7mm. The item itself has a height of 17mm. You need a metric key 22 to install this item. This is quite a common key size in most peoples toolbox. But what is the function of this part and where can it be found.
This threaded stuffing gland is used in the side of the Faema E61, Faema E61 Legend...
The item on this page is a hardened steel pin for a steam and water valve. This shaft can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.3, the Fiorenzato part reference is A2200266, the Marzocco reference is B.1.004/3 and the Vibiemme part...
This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat.
This gasket is made from food graded red silicone....
The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Faema, Grimac, Astoria, Wega, Rancilio and Conti. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is IMS3T011. Note: this is not a competition filterbasket.
This stainless steel...
The drain valve on this page can be used on various E61 style of brewing groups. Models such as ECm, ECM Heidelberg, La Pavoni, Rocket and Vibiemme espresso machines. Not on the Faema E61
This drain valve has been machined from a single piece of brass. After that it has been polished, nickel plated and finally chrome plated. This item is made in Italy....
On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore.
With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...
This Expansion board can be used on various SanRemo espresso machines such as the F18SB, Roma, Verona and the Zoe. This specific item is produced by Gicar with the part reference number 8.8.17.44G. The matching SanRemo part reference number with this part is 10112186A
This expansion board is a 230V model which runs on 50/60Hz. This product has been made...
