Ulka vibration pump EX5 24V brass outlet 50/60Hz

The pump on this product page is made by the Italian company Fluid o tech. this type of fluid o tech coffee machine pump can be used in various San Remo espresso machines. The San Remo part reference for this pump is 10252072C This fluid o tech pump has a flowrate of 200 L/H and is equipped with a balanced by-pass. The fittings for the in and outlet for...

The item on this page is a espresso machine pump filter. Not suitable for a vibration pump. This item can be used on basically every espresso machine pump which has a 3/8” BSP-G Thread. But you will see this type of pump filter on Astoria and Wega espresso machines. The part number 56116 for Astoria and for Wega the number WY56116. This filter has...

On this page you will find a vibration pump, not from Ulka, but from Fluid o tech. Fluid o tech is less known for their vibration pumps. The fluid o tech vibration pump on this page is part 1106PAAAM1E0000 This specific vibration pump has 45W but runs on 24V at 50/60Hz. The vibration pump as on both sides a 1/8” BSP-G female fitting. The pump is no...

The item on this page is a espresso machine pump which can only be found on various La Pavoni espresso machines. This pump is manufactured by the company Procon in Ireland. The Procon part references are 112B035F123B, 112B035F123B+, 112B035F123B150 and CB51505BLF. The La Pavoni part reference numbers are 452006  and 452010.  This pump is a clamp on pump...

To connect a flange pump and flange motor to each other you need to have 2 coupling plates and a rubber middle coupler which connects the coupling plates to eachother. This rubber motor pump coupling is universal and can be used with the metal coupling plates with a rounded off shaft and with the slitted pump coupling connection. These type of couplings...

The stainless steel filter on this page can be used in a variety of applications like in hydraulic systems, pump inlets and in water inlet valves. This model of stainless steel filter is mainly used with Astoria CMA branded machines. The Astoria part number is 10254 and the Wega part number is WY10254  This dome shaped stainless steel wire mesh...

On this page you will find a stainless-steel water filter. Suitable for pumping the water of the pumps used on espresso machines manufactured by the Cimbali Group. This filter is used with the Casadio part number 490055000, Cimbali part number 490-055-000 and the Faema part number 490055000. This stainless-steel wire mesh filter has a outer diameter of...

With Faema and La Cimbali flange pumps there is a additional coupling between the flanged motor and the flanged pump. This coupling is made of 2 metal couplings. 1 connects to the espresso machine motor shaft, the other connects to the pump. Note: this coupling has a round shaft opening with a flat side. The metal connectors have a OD of 40mm. In between...