This Nuert pump is one of the few espresso machine pumps made in stainless steel. The majority of all the pumps are still made from low lead brass. This specific pump is designated as a “Compact Plus “pump and has the part number PRM15FZXN_EGND.
This pump is specially made for the espresso machines models made by the La Cimbali group. There are a few key features of this. The connection system and the shaft.
The small shaft square shaft used on this espresso machine pump is only used by the La Cimbali group. As well for the bolt on pump. This pump is bolted to the espresso machine motor with 2 screws/bolts.
This specific pump has a flowrate of 180L/H and is equipped with a balanced bypass. If you want to adjust this pump. Unscrew the brass nut. Now you can screw the setscrew inwards or outwards. Inwards for higher pressure and outwards for a lower pressure. Don’t forget to tighten the hex nut again.
If you want to install fittings in the in and outlet of this pump you need to have fittings which have a 3/8” BSP-G thread. The overall length of the pump minus the shaft is 70,3mm
On which espresso machines can I use this Stainless steel espresso machine pump of Nuert? You can use them on the Casadio models Casadio Quindici and Casadio Undici. The La Cimbali model La Cimbali M34. You can also use them on the Faema models Faema E71, Faema Emblema and the Faema Teorema.
Looking for similar items or different specifications for this Nuert Flange pump Stainless steel 180 L /H?
Explore our full range in the Casadio, Faema, La Cimbali categories
*
This part is compatible to the original part number. Part numbers are always leading.
The steam valve fitting on this product is used on various Faema espresso machines. This fitting is used to fix the steam tube to the steam valve. The Faema part reference for this item is 3952133708.
This fitting has a male 1/2 “ Thread. The item has been made in Italy.
This fitting can be used on the Faema E91 and the Faema Due espresso machine
The handle knob on this page can be used on Faema E61 brewing groups. This handle goes on the brewing group control lever. Originally these were made from Bakelite, but nowadays that isn’t made that much anymore. The Faema part reference fort his item is 4741135910
This plastic lever brewing group handle is made from a shiny plastic. In the middle is a...
On this page you will find a 2 way solenoid valve made by the company Parker. This specific Parker 2 way solenoid valve is used with various brands as a water inlet valve for filling the boiler. The Parker parts number for this item is 393233J
This 2 way solenoid valve is one of the types which has a flange model, this model is sealed with the 2 o rings...
This Fluid o tech rotation pump is a more uncommon version in the world of espresso machines and only used by a selection of brands. The part is designated as a “standard” pump and the part number for this pump is PO0204FNADN0000. This pump has a NSF approval.
The espresso machine pump on this page has a flowrate of 200 L/H and is equipped with a balanced...
The item on this product page is a item which can only be used on the Faema E61 brewing groups. So it is not suitable to use on the E61 style of brewing groups. The Faema part reference number for this item is903828000.
This drain valve is used in the bottom section of the brewing group, all the way at the end. This item is made from machined brass. This...
The capacitor on this page is a 10µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.1564. This capacitor is used as a start capacitor for pump motors and as a start motor for the coffee grinder motor. This capacitor can be found with brands such as Casadio, Carimali, Vibiemme, Cimbali,...
The steam valve knob on this page is suitable to use for various Faema espresso machines. The part reference on this item is 930020010. This handle has been made in Italy.
This handle can be used in combination with the DX tap handle body and the SX tap handle body. The reference for the DX is 911563010 and fort he SX the reference is 911564010....
The article on this product page is a tap spring guide, used on various Faema water inlet valves. The Faema part reference number for this item is 4701132822. This article has been made in Italy
This Spring guide can be used on the water inlet valves on the Faema Due, Faema E91, Faema E97.
