La Pavoni 加热元件 1 - 2 gr 3000W 230/380V
€67.00不含税
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
本页上的加热元件适用于各种 La Pavoni 浓缩咖啡机。 Pavoni 零件编号为 331120,可用于 Pavoni Uno、Pavoni Tre 和 Pavoni P90
该加热元件在 230-380V 下产生 3000W 的功率,并具有 6 个连接极。 该元件的浸入长度为 240mm。 使用的法兰是三角形法兰,69x69mm。 螺栓孔之间的距离为52mm。
该法兰上使用的加热元件垫圈是三角形的,边缘倒圆。 垫片为70x70mm,厚度为2mm。 内孔为40mm。
详细信息
- La Pavoni
- P90
P tre
P uno - 水下长度
- 240mm
- 牌
- La Pavoni
- 瓦
- 3000W
- 电压
- 230/380V
- 类型部分
- 加热元件
- 零件号
- Pavoni 331120
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
首先是加热元件的法兰,由于法兰型号的不同,这些加热元件在大多数情况下是不能互换的。另一个重要特征是加热元件的长度。如果太长,就无法安装。如果加热元件太短,锅炉中的热量分布就会不均匀。
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.