加热元件垫圈 PTFE 57x43x3mm
€2.24不含税
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
在此页面上,您会发现 PTFE 加热元件垫圈适用于各种品牌,例如 Victoria Arduino、Grimac、Astoria、Faema 和 San Remo。
这种加热元件垫圈外径为57mm,内径为43mm,厚度为3mm。 这种尺寸的垫圈适用于加热元件中的 1”1/4 螺钉。
详细信息
- Astoria CMA
- Plus 4 You
Sabrina - Grimac
- Zola-I
Zola-II - San Remo
- Amalfi
Capri
Milano LX
Pisa
Torino
Venezia
Verona
Zoe
Zoe compact - Victoria Arduino
- Athena Leva
Venus Bar - 牌
- Astoria
BFC
Faema
Grimac
La Cimbali
Orchestrale
Royal
San Remo
Victoria Arduino - 类型部分
- 加热元件垫片
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
首先是加热元件的法兰,由于法兰型号的不同,这些加热元件在大多数情况下是不能互换的。另一个重要特征是加热元件的长度。如果太长,就无法安装。如果加热元件太短,锅炉中的热量分布就会不均匀。
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.