This is a extra layer of protection for your Ulka espresso machine vibration pump. When your pump is running dry or way too much then specified, the temperature will rise and eventually electrical components will break down. With this thermal protector your vibration pump will be saved, but the thermal protection will fail. This specific model has a max...

The bottomless portafilter on this page is suitable for brewing groups manufactured by Victoria Arduino and Nuova Simonelli. Seen those brands are the company. The bottomless portafilter on this page have a ear orientation of 45 degree and have a ear thickness of 7mm. The body is also inclined. The portafilter comes with a double filterbasket and with a...

On this page you will find a touchpanel membrane for the Faema Enova A, so not for the Enova S. This item is compatible with the Faema part reference of 915313010. This touchpanel has in total 5 buttons. 4 of these keys are for the pre-set volumetric settings. The other one is the continuous key and the programming key for the volumetric settings. Note:...

On this page you will find a green light kit for various Astoria and Wega espresso machines. The Astoria part reference for this item is 83210010R and the Wega part reference is WY83210010R. This green light kit comes with 2 components. The green light with cable and connectors and the protective grommet. This light runs on 230V. You can use this kit on...

The compression spring on this product page can be found with a variety of espresso machine brands. It is used for applications in the steam and water valve with brands such as Victoria Arduino, Nuova Simonelli, la Spazaiale, Elektra and San Remo. The Spaziale part reference is 07568, The San Remo reference is 10402043, For Carimali it is 13.00059 and...

The double spout shown on this page can be used with a variety of espresso machine brands. Brands such as ECM Heidelberg, Bezzera, Astoria, Wega, Spaziale, Rancilio and Gaggia. This double spout is from the type of open model. It has been casted from brass, machined and a nickel and chrome finish applied to it. The thread of the spout is a 3/8”...

How am I going to adjust the grind adjustment on my Mazzer coffee grinder? Well your burrs can be adjusted with the burr adjustment ring (SSJ0GHA02) this pin goes into the side of this ring in one of the 5 mounting holes. This specific adjustment pin screws into one of these 5 holes with a M5 thread. Note: if the ring doesn’t move because it is...

On this product page you will find a grinding burr suitable for the coffee grinder brand Anfim. This specific model is suitable for the Anfim Haus. The part references for this item are 50 and 50-A. This flat burrs have a outer diameter of 50mm a internal diameter of 30mm and a thickness of 7,6mm. These flat burrs are left turning. They have been designed...

This brass tap spindle is used a the Faema E61 steam and water valve and the valves which have resemblance to the e61 valve used by brands like Vibiemme, La Scala and Grimac. When the shaft axle is turned open or closed, this tap spindle pushes against the valve seat. Which opens or closes the steam/water valve. This specific brass tap spindle has a...

Brass fittings used on espresso machines are generic items, seen they are used in quite a lot of coffee machines. This specific model is a nut with a 3/8” BSP-G thread with a height of 6mm. The wrench size used for this item is a 21. Which models use this 3/8” BSP-G nut.? Well you can find this nut with brands like: Gaggia, Saeco, Victoria Arduino,...

Faema E61 expansion valve 3/8 inch

The P303T01 a more lightweight 3 phase pressure switch then the Asco P302/6 3 phase pressure switch. The difference is also that the P302/6 has a partially metal cover. And the P303T01 has a full plastic cover. This pressure switch has been used espresso machines like: Bianchi, Fiamma and Orchestrale.Nowadays these pressure switches are named Asco, in...