Faema E91 steam pipe fitting

On this page you will find a tear drop shaped steam nozzle which can be used in combination with some models of  Faema, Casadio and La Cimbali. Note: this steam nozzle has a male thread, so if your original steam nozzle has a male thread as well they are compatible. The steam nozzle has in a circular pattern 3 holes and in the middle a additional...

The steam pipe on this page is suitable for various Wega espresso machine models like the Wega Airy, Wega Atlas, Wega Orion, Wega Polaris and the Wega Start. The Wega part number for this item is WY56119001. This steam wand tube has been made from stainless steel and has a diameter of 8mm. The steam tube has also been provided with a rubber anti scorch...

The steam tube on this page is suitable for the La San Marco 85 espresso machine. The La San Marco part reference for this item is 206320. The steam tube has been made from a stainless steel tube of 10mm. This tube does not come with a rubber protected sleeve, you can install one if you want. The developed length of this tube is 240mm The fitting on the...

The Steam stem on this product page can be used on various espresso machine brands such as Nuova Simonelli, Victoria Arduino and Rancilio. The steam stem has been made from stainless steel. this steam stem has a cylindrical shape. There are in total 4 holes for the steam. These holes have a diameter of 1,5mm.

If you have a chrome plated or stainless steel steam tube and you want to move the tube when it is warm. It is likely that you will burn your hands. On this page you will find a rubber sleeve which prevents this. This sleeve can be used on a large selection of steam tubes which have a diameter of 8mm. The overall length of this sleeve is 50mm and has been...

The steam pipe on this page is a stainless-steel steam tube. It is suitable for various models made by Astoria and Wega. The reference numbers for Astoria are 25763009 and for Wega WY25763009  This steam tube has a outer diameter of 10mm and the tube and tip have been made from stainless steel.  The steam tip has 4 steam holes and is made...

The steam tube shown in this page is suitable for the La San Marco 100 espresso machines. The San Marco part reference for this item is 206414. This steam tube has been manufactured from stainless steel, the tube itself has a outer diameter of 10mm. The fitting on the valve side is a female 3/8”BSP-G thread. The steam tip has in total 4 steam...

On this page you will find a steam tube steam nozzle. This steam nozzle can be used on steam tubes which have a M10x1 thread. This type of M10 thread is a fine threaded model seen the pitch is only 1mm. There are 4 holes in this steam nozzle, both have a diameter of 1,5mm. Examples of models where you can use this on is the ECM Michelangelo, ECM...