This Procon rotation pump is slightly different then most pumps made for the espresso machine market by Procon. This pump is only suitable for a selection of coffee machine brands. The Procon part number for this item is 112T060F123B130 As mentioned earlier this is a bolt on espresso machine pump. The motor has a flange with bolt holes in in it. You...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

On this page you will find a clamp on rotation pump. This specific model Compact Plus (MO0154EAADN) has been made by the Italian company Fluid o tech in Italy. This type of coupling is only used with a couple of coffee machine brands, which are all part of the La Cimbali Group. So, you will find them with the espresso machines Casadio, La Cimbali and...

On this page you will find a Nuert rotation flange pump. This model type can only be used on espresso machines made by the La Cimbali group. This specific model of rotation pump is called the “Compact Plus” with part number PRM15FZ1N_EGND. The pump in question is a flange pump. This pump is attached the espresso machine motor with 2...

This small o ring can be used on various Casadio and Faema espresso machine models. This o -ring is used in various brewing groups. The part references for this item are for Casadio 402197000, Cimbali 402197000/ 402-197-000 and for Faema 402197000. This o ring has been made from FKM. This o ring has a cord diameter of 2,7mm and a internal...

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm...

The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model. This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...

On this product page you will find a 3 way solenoid valve made by the company Lucifer, this part of the company Parker. This solenoid valve can be used on various espresso machine brands such as Cimbali and Faema. The corresponding part references would be for Faema 533892300R and 533892300. For Cimbali 533-892-300R and 533-892-300. This solenoid valve...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

The portafilter gasket on this page is used on various Wega espresso machine models. The Wega part reference for this item is WY12228. This portafilter gasket has been made from NBR. This gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. There are on the inside 3 cuts. This gasket has been made in Italy. You can use...

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...

The pump on this page is a OEM/Original Cimbali/Faema rotation pump. But this pump is slightly different, most pumps are made from casted brass but these are made from stainless steel. This pump has been made by the Italian company Fluid o tech. The part references for this pump can be found in the extra info tab. This pump has the name Compact plus and...