Gaggia Evolution

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

The item on this product page is a OEM/original spare part. This drain tray is used various brands such as Gaggia, Pavoni and Saeco. The Gaggia part reference is WGA4001097000, the Pavoni part reference is 371010  and for Saeco the reference is WGA4001097000. This drain pan is made from a black plastic. The pan has a length of 100mm a width of...

The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762 You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface. This type of Allen screw is used in a lot of espresso...

The portafilter gasket shown on this product page is one of the most common sizes found on commercial espresso machines. But this gasket hasn’t been made from NBR as traditionally done, but from food grade silicone. You can find this portafilter gasket on brands such as Faema, Vibiemme, Bezzera and La Scala. This red silicone gasket has a outer diameter...

The item on this product page is a shower holder which can be used on various Saeco and Gaggia espresso machines. The Gaggia part reference numbers for this item are 16G1002  and WGA16G1002. The Saeco part reference number for this item is WGA16G1002. This shower holder diffuser has been made from brass. The external diameter is 57mm and the height...

The shower screen shown on this page is one used on various commercial espresso machines made by Gaggia. This model shower screen has been made by IMS filtri. The part reference for this item is IMSDR323. Note: this is not a competition shower screen. This stainless steel shower screen has a outer diameter of 55mm. The central hole is suitable for a M5...

Gaggia closure drain

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...

On this product page you will find a contact thermostat which is used on a variety of espresso machine brands. You will find this contact thermostat on Brasilia, Gaggia and Isomac espresso machines. The part references are for Brasilia 09415.2.00.08, Gaggia WGADM1561 and for Isomac IS000281.  This contact thermostat is set at 100°C and is a...

On this page you will find a solenoid valve made by the parker company. This specific solenoid valve is a 3 way valve. The Parker part numbers for this item are 393117J and 393122J This specific 3 way valve is one of the flanged series. This flange seals off with 2 small o rings.  The valve runs on 230V at 50/60Hz, the coil used on this valve is the...