Filter by
Categories
Price
Manufacturers
Filter

Home

Ronda replacement coffee knock bar

At some point the bar of your Ronda Knock box needs to be replaced, luckily you don’t have to buy a completely new drawer, seen you can buy them apart. This knock bar can be used on the model AP272, AG12 and AG14 The rod diameter of this knock bar is 30mm and the length is 311mm, the total overall length of the knock bar is 342mm. This item is a...
€59.17

Astoria Wega RPM motor 120W 230V

This motor is made by RPM from Italy with model number for this pump motor C013728. It has a power of 120W with 230V at 50Hz. The start capacitor for this motor is a 8 µf. This espresso machine motor is used in combination with a clamp on rotatry vane pump. This motor is clamped to the flange with a stainless steel motor clamp. For this motor a...
€204.15

Vibiemme touch panel + 1gr 230V

On this product page you will find a touchpanel which is suitable for a variety of models made by Vibiemme. This touchpad has been made by the Italian company Gicar, the part reference of this item is 9.9.07.60G This model has the Vibiemme part reference of ELETPUL1LEDAL. On the far right you have the continues/programming key. With this key you can...
€114.94

Bezzera pump manometer 40mm 0-16bar

On this product page you will find a pump pressure gauge which can be used with various brands such as Bezzera and ECM Heidelberg. The part reference for Bezzera is 7432523 and for ECM Heidelberg is B7432517  This pump pressure gauge goes from 0 to 16 bar. The case of this manometer has a diameter of 39mm, the frame is 44mm. The connection...
€31.68

Faema rubber pump-motor connector 40 mm

To connect a flange pump and flange motor to each other you need to have 2 coupling plates and a rubber middle coupler which connects the coupling plates to eachother. This rubber motor pump coupling is universal and can be used with the metal coupling plates with a rounded off shaft and with the slitted pump coupling connection. These type of couplings...
€4.16

La San Marco portafilter gasket 64x52.5x5.5mm original

The portafilter gasket on this page is a OEM/Original San Marco spare part. The part reference for this item is 109130  The gasket has been made form NBR. The outer diameter is 64mm, the inner diameter is 52,5mm and the thickness is 5,5mm. The gasket has on the outside external cuts. This gasket has been made in Italy. You can use this gasket on San Marco...
€10.21

La San Marco gasket O ring 74.6x5.9mm

The o ring shown on this page is used on various La San Marco espresso machine brewing groups. The part reference for this item is 109045. This group gasket o ring has a thickness of 5,9mm a inner diameter of 76,6mm. the gasket has been made in Italy You can use this gasket / o-ring on the lever operated brewing groups and the older model of manual...
€4.31

Bremas main switch 32A 690V 0-1

The small main switch on this page is used on various Astoria espresso machines. The Astoria part reference for this item is 18207. This switch has been made by the Italian company Bremas, they have multiple part references, check the extra info tab for those. This Bremas switch is rated up to 32A at 690V. This switch only has 2 positions 0-1. This...
€89.89

VA/NS boiler 1000W 230V

The boiler shown on this page is a OEM/Original Nuova Simonelli/Victoria Arduino spare part. The Nuova Simonelli and Victoria Arduino part references for this item are both 98030308. This stainless-steel boiler has a heating element permanently installed in it. The heating element produces 1000W at 230V. The boiler has a outer diameter of 77mm and a...
€208.36