La San Marco - manual group 01

The gasket on this page can be used in various models of brewing groups of La San Marco. The La San Marco part reference number for this item is 109078. This gasket is made from the material PTFE. The outer diameter is 34mm, the inner diameter is 27mm and the thickness is 2mm. This gasket is made in Italy. You can use this PTFE gasket on the lever...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

La San Marco PTFE HX gasket 34x27x2mmReturn to the  San Marco group parts overview

The item on this product page is a OEM/Original La San Marco spare part. This item is a plug with a jet and filter. The San Marco part reference is 206300 and CCMMIN1440. This plug is used in various La San Marco espresso machines which use a hydraulic system. This item has been made in Italy.

On this you will find a paper seal/shim or filler. These paper shims are a handy and cheap solution to fix your portafilter gasket problems. When you use your portafilter the lugs and the bayonet like system of the group wear. So when you use a standard thickness of portafilter gasket it is possible that your portafilter doesn’t seal or goes too...

The portafilter gasket on this page is a OEM/Original La San Marco portafilter gasket. The La San Marco part reference is 109011. This gasket has been made from NBR. The outer diameter of this gasket is 64mm the inner diameter is 52,5mm and the thickness of the gasket is 5,5mm. The gasket has on the outside 3 cuts. The gasket has been made in Italy. You...

The single filterbasket on this page can be used on La San Marco espresso machines. The La San Marco part reference for this filterbasket is 202122. This filterbasket has been made by the Italian company IMS Filtri. The part reference from IMS is SM1T118. This single coffee filterbasket has a outer diameter of 66mm and a height of 25,5mm. This...

This group gasket is used in various older La San Marco espresso machines. This gasket goes between the brewing group and the shower holder plate itself. There is no part reference number available for this item. This gasket is made from a universal type of carbo gasket material. The outer diameter is 51mm the inner diameter is 19mm and the thickness is...

On this product page you will find a portafilter gasket suitable for a variety of La San Marco brewing groups. The La San Marco part reference for this item is 109011. This gasket has been made from NBR. The filter holder gasket has a outer diameter of 64mm a inner diameter of 52,5mm and a thickness of 5,5mm. This gasket has 3 external cuts and has been...

This item is a conical PTFE gasket. This gasket is used with various brewing groups of La San Marco. The part references for this item are 106151 and CMPTOR0020. This conical gasket has been made from PTFE. The outer diameter of this gasket is 10mm. the inner diameter is 4mm and the thickness is 6mm. This gasket has been made in Italy.  This...

On this product page you will find a bottomless portafilter suitable for the La San Marco brewing groups. La San Marco is the only commercial brand which uses the 3 ear configuration instead of the standard 2 ear configuration. This portafilter has been manufactured in Italy. The thickness of the ears on the bottomless portafilter are 7mm instead of the...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...