The contactor on this product pave can be found on a wide selection of coffee grinders. You can find them on grinders from Mazzer, Gaggia, Macap, La Spaziale, Quamar and Astoria. But this contactor can also be used on various La Cimbali espresso machines.
This contactor has been made by the Italian company Lovato. The model is called the BG0910A. This contactor is rated up to 4kW at 400V with 9A. The coil is a 230V at 50/60Hz. There are 3 normally open(NO) and 1 NO auxiliary contact. This contactor has been made in Italy.
You can use this Lovato contactor on the Mazzer Mini, Mazzer Super Jolly, Mazzer Kony, Spaziale Astro, Spaziale M900, Elektra MX, Elektra MXA, Macap M4, Macap M7, Macap M7900, Gaggia MD58, Gaggia MD75. For the complete list of models and part references check the extra info tab.
The item on this product page is a OEM/Original Mazzer spare part. This item is a compensation ring used in a Mazzer doser system. The part reference numbers for this item are S000ANA01, S000ANA01/AQQ and S000ANA01/QQQ.
This compensation ring has a outer diameter of 32mm and has been made in Italy.
This compensation ring can be used on the Mazzer...
The tamper on this product p age is a OEM/Original Mazzer spare part. This tamper is attached to the coffee grinder. The Mazzer part references for this item are S000PRA02/A, S000PRA02/QAQ. S000PRA02A and S000PRA02-A.
This original tamper has been made from black plastic. The outer diameter of this tamper is 53mm. This tamper has been made in Italy...
The doser pressure spring is a spring type you would only find, you probably guest it, in the doser. This spring is used to keep pressure on the doser stars.
This spring has a outer diameter of 14,6mm a inner diameter of 12,2mm and a effective height of 51mm. It is a original Mazzer grinder part.
You will find this specific spring in the doser of the...
On a variety of Mazzer coffee grinders you can find this grind adjustment spring. So, what does this spring do? Well, this spring supports the upper burr holder. So, when the burrs are set on the finest position, but you want to make them a bit coarser. You turn the grind setting adjustment ring outward. The springs will push the upper burr in its correct...
This grinder doser regulator knob is used in most Mazzer doser grinders. As well as some Astoria coffee grinders. With this knob you can adjust the dosing amount from the coffee doser. This specific item has a internal thread which is a M8 female thread.
This specific model of adjustment knob is being used in some models of Astoria, like the Astoria...
On this product page you will find a set of burrs suitable for the Mazzer Mini doser. This set of burrs is a OEM/original burr set.
The outer diameter of the burrs is 58mm, the internal diameter is 33,5mm and the thickness of the burrs is 8,5mm. The burrs have on each side 3 mounting holes. These burrs are flat and are right turning. Manufactured in...
The Mazzer doser coffee grinders have a doser reservoir on the front of the coffee grinder. You do need to see visually how much coffee there is still left in the doser. Therefore the doser is partially made from a transparent plastic so that you can see how much there is left. The disadvantage is this clear plastic can get dirty, and can’t be...
It is not uncommon that your hopper breaks or is virtually impossible to clean again. Especially when you have a bar or coffee shop, clear gear is key. Then the easiest solution is to buy a new hopper. On this page you find a original hopper made for the Mazzer mini. This hopper is suitable for the Mazzer mini doser, Mazzer Mini Electronic A and Mazzer...
