O ring gasket 7.2x1.9mm epdm

The small main switch on this page is used on various Astoria espresso machines. The Astoria part reference for this item is 18207. This switch has been made by the Italian company Bremas, they have multiple part references, check the extra info tab for those. This Bremas switch is rated up to 32A at 690V. This switch only has 2 positions 0-1. This...

The water inlet valve shown on this page is suitable for a variety of La Cimbali and Faema espresso machines. The part references for this item are for the Cimbali the reference is 952706030 and for Faema 952-706-030 This valve is complete and ready to install, including the 24V water inlet solenoid valve. You can use this water inlet valve on the La...

The Mazzer Super Jolly uses flat grinding burrs, instead of the conical grinding burrs some Mazzer models use. The grinding burrs shown on this page are used in the Mazzer Super Jolly Doser and the Mazzer Super Jolly. The original flat grinding burrs, which are left turning, have a external diameter of 64mm and a internal diameter of 37mm. the thickness...

Nuova Simonelli 3 pole pressure switch 30A 400V original

The spring on this page is a doser return spring. This spring is used on various brands of the La Cimbali Group. You can find them with doser coffee grinders of Casadio, Cimbali and Faema. The part references for this item can be found in the extra info tab. This spring makes sure that the dosing lever returns to it’s original position. This...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

Elektra Microcasa o ring 31.42x2.62mmReturn to the Elektra Microcasa parts overview page

This steam and water valve compression spring is used in a variety of La San Marco espresso machine models. The La San Marco part reference for this item is 200033  This compression spring is made from stainless steel and has a outer diameter of 16mm. the overall length of this spring is 20mm. The item has been made in Italy. You can use this...