Rancilio boiler manometer 0-2,5 bar original

Silicone hose 3x6mm shore 60

On this page you will find a 2 way solenoid valve manufactured by the company Parker, this specific valve has been produced in Italy. This solenoid valve is mainly used as a water inlet valve and a steam and water valve solenoid. The Parker part numbers for this item are 397442 and 397443. This solenoid valve is a version which has a female threaded in...

On this product page you will find a heating element suitable for a variety of single group La Cimbali espresso machine boilers. For the part references check the extra info tab. This heating element produces 1800W at 220V. There are 6 connecting poles on the heating element. In the middle of the flange, this flange is 75x75mm, is a spare tube for a...

The brass nut on this product page can be used on various steam and water valve used on the San Marco espresso machines. The San Marco part reference numbers for this item are 205123 and CCMMIN1020. This brass nut has a female 3/8” BSP-G thread on the inside. The thickness is 6mm and the outer size is 26mm. This fitting has been made in Italy....

Every espresso machine boiler needs to have their Safety valve changed with fixed intervals to be sure that when the pressure switch/thermostat fails the pressure doesn’t gets too high. So on this page you will be able to find a safety valve, the biggest size used on espresso machines, the ½”BSP. This valve is calibrated from the...

The solenoid valve on this page is a water inlet valve made by the company Parker, this valve has been manufactured in Italy. The parker part number is 397484 This solenoid valve has a inlet and outlet which have a ¼” BSP-G thread in the inside. The orifice in the middle of this valve has a diameter of 3mm and is sealed off with a FKM...

The single portafilter shown on this product page is a OEM/Original Wega spare part. The part reference for the body of this portafilter is WY27311010, so not the entire portafilter. This portafilter is a 1 coffee model. The spout used has a 3/8” BSP-g thread and is open. The ears have a 90 degree orientation. The thickness of them is 6,5mm. the...