Cimbali M15/M20 water tube

This Conical PTFE gasket can be used on a variety of Brasilia espresso machines. For this item there is a Brasilia part reference of 00810.0.00.02. This gasket has a conical shape. The outer diameter of this PTFE gasket is 14,5mm, the inner diameter is 10mm and the thickness is 5mm. This gasket can be used on the rubber as well as on the ceramic valves....

The capacitor on this page is a 10µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.1564. This capacitor is used as a start capacitor for pump motors and as a start motor for the coffee grinder motor. This capacitor can be found with brands such as Casadio, Carimali, Vibiemme, Cimbali,...

On  this page you will find a 3 way solenoid valve made by the company Parker. This specific model is a 24V AC 3 way valve. Which can be used on some Faema and San Marco brewing groups. The parker part number for this item is 393110J This solenoid valve is a flanged 3 way valve. The flange is sealed off with the 2 o rings at the bottom of the valve....

This heat exchanger support ring is used on La Cimbali brewing groups with the heat exchanger. This ring slides over the heat exchange itself and supports the copper heat exchanger. This ring is suitable in combination with the 210mm heat exchanger and the 150mm heat exchanger. The Cimbali part number used for this item is 457-165-028 This heat exchanger...

To hold a coffee filterbasket in it’s place there is always a spring installed in the portafilter. In each modern portafilter is a recess machines to accommodate such a spring. The type on this product page can be used on brands such as Casadio, Carimali, Scala, Cimbali and Rancilio. This spring is made from stainless steel. The cord diameter is...

The level regulator can be used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number for this item is M2004 This Gicar level regulator is called the Dosatura Manuale Deluxe SSR 230Vac. Which has the Gicar part reference number of 9.9.36.12G00. This level regulator can be used on the ECM Heidelberg Mechanika, ECM...

This Fluid o tech rotation pump is a more uncommon version in the world of espresso machines and only used by a selection of brands. The part is designated as a “standard” pump and the part number for this pump is PO0204FNADN0000. This pump has a NSF approval. The espresso machine pump on this page has a flowrate of 200 L/H and is equipped...

Thomas Diaphragm pump 24Vdc