Wega - Inlet valve

Faema E61 small non return valve

Every valve needs to have return spring to close again. On this page you will find the return spring used in the Faema E61 steam and water valve. As well in their successors used in Vibiemme, Grimac and la Scala machines. This spring is made out of stainless steel and has an external diameter of 12,5mm and a length of 30mm. So, steam and water valves...

The item on this product page is a OEM/Original Astoria/Wega spare part. This item is the water inlet pin, used on various models. The Astoria part reference for this item is 25315 and the Wega part reference is W10550 and WY25315  This stainless steel pin has a outer diameter of 8mm and a overall length of 35.6mm. You can use this pin on...

The expansion valve gasket shown on this page is a generic item. You can find it in the catalogue of a variety of espresso machine manufacturers. The gasket is a flat NBR gasket with a pin at the end. The widest section of the gasket has a diameter of 15mm and the pin has a diameter of 6mm. The total height for the gasket is 10mm. Which espresso machine...

Brass fittings used on espresso machines are generic items, seen they are used in quite a lot of coffee machines. This specific model is a nut with a 3/8” BSP-G thread with a height of 6mm. The wrench size used for this item is a 21. Which models use this 3/8” BSP-G nut.? Well you can find this nut with brands like: Gaggia, Saeco, Victoria Arduino,...

The brass washer on this product page is a OEM/Original Astoria CMA spare part. This brass washer is used in the water inlet valve. The Astoria part reference is 25653 and the Wega part reference is WY25653. This washer has been made from brass. The outer diameter is 15,4mm the inner diameter is 9mm and the thickness is 1mm. This item has been made...

This is maybe one of the most universal gaskets around. The gasket for the male 3/8” BSP-G fitting. You can use this fitting on water inlet valves, boilers, safety valves, anti vacuum valves. This copper gasket is a compression version, so it will form slightly around the surfaces it is mating. The outer diameter is 22,8mm, the inner diameter is 17mm and...

The compression spring on this product page is used on various water inlet systems of Astoria CMA espresso machines. You will find this spring with the brands Astoria and Wega. The part references for Astoria are 10451 and for Wega W10545/WY10451. This stainless steel spring has a outer diameter of 14mm and a overall length of 45mm. You can use...

The item on this product page is a lip seal which is used on a water inlet system. You can find this lip seal with various Astoria and Wega espresso machines. The Astoria part reference for this item is 12205 and the Wega part references are W10527 and WY12205. This lip seal is used to seal off the manual filling shaft. The outer diameter is...

The flat copper gasket on this product page can be used with a variety of espresso machines and on various applications. You can use this copper gasket on espresso machines such as Marzocco, Casadio, ECM Heidelberg, La Scala, La Cimbali, Faema, Astoria, Wega, Nuova Simonelli, Wega and Rancilio. You will mainly see the use of this copper gasket to seal...

One of the most universal items. The male brass plug. The plus on this page can be found in the catalogue of a variety of espresso machine manufacturers like Astoria, Faema, La Spaziale and Wega. This specific plug has a male ¼”BSP-G thread. The height of this plug is 13 mm and the wrench size for this plug is 17mm.

The expansion and non-return valve on this page is one of the most standardized items used in espresso machines manufactured by the Astoria CMA company. The Astoria part reference is 20361 and of the Wega the part reference is WY20361  This non return and expansion valve has 1 inlet and 2 outlets. The inlet is a male ¼” BSP-G, the exhaust outlet is a ¼”...