مصنف بواسطة
التصنيفات
Price
€ €
Manufacturers
Filter

الصفحة الرئيسية

Brass welding cap 4mm Brass welding cap 4mm

غطاء لحام نحاسي 4 مللي متر

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This type of brass welding cap is the smallest welding...
1.56 €
compare
نظرة سريعة
Ulka Vibration pump NME 4 230/240V 16W Ulka Vibration pump NME 4 230/240V 16W

Ulka Vibration pump NME 4 230/240V 16W

هذه المضخة واحدة من المضخات النموذجية الأصغر التي صنعتها شركة (أولكا) الإيطالية هذه المضخة تُدعى "الإن إم 4" مع رمز منتجات "أولكا" 1.02.535.04.هذه المضخة تحتوي على بلاستيك و منفذ قطرة الحوض على الجانب الداخلي هي 5 ملم وعلى الجانب المنفذ 6 ملم. This is a low pressure pump with a maximum pump capacity of 2,5bar and a maximum water temperature of 20 degree...
15.00 €
compare
نظرة سريعة
Portafilter gasket 73x57x9mm red silicone Portafilter gasket 73x57x9mm red silicone

Portafilter gasket 73x57x9mm red silicone

The portafilter gasket shown on this product page is one of the most common sizes found on commercial espresso machines. But this gasket hasn’t been made from NBR as traditionally done, but from food grade silicone. You can find this portafilter gasket on brands such as Faema, Vibiemme, Bezzera and La Scala. This red silicone gasket has a outer diameter...
4.52 €
compare
نظرة سريعة
Astoria Wega portafilter gasket 64x52x6.3mm Astoria Wega portafilter gasket 64x52x6.3mm

Astoria Wega غطاء المرشح المحمول 64x52x6.3mm

The portafilter gasket on this product can be used on various Astoria and Wega espresso machines. The Astoria part reference number for this item is 12217001 and for Wega it is WY12217001. This gasket has a outer diameter of 64mm and a inner diameter of 52mm. The thickness of this gasket is 6,3mm. There are on the inside 3 cuts. This item has been...
3.62 €
compare
نظرة سريعة
O ring silicone 3,68X1,78mm O ring silicone 3,68X1,78mm

O ring gasket silicone 3,68X1,78m m

The o ring on this page can be used on a variety of espresso machine brands with various applications. You can find this o ring with brands such as Faema, Nuova Simonelli, Pavoni, Victoria Arduino and Gaggia. This o ring has been made from silicone. The cord diameter is 1,78mm and the internal diameter is 3,89mm. This o ring has been made in Italy. This...
0.63 €
compare
نظرة سريعة
طوقا PTFE 24x19x2mm

طوقا PTFE 24x19x2mm

The gasket on this product page is made from PTFE. This type of gasket is used with various brands such as ECM Heidelberg, Marzocco, Vibiemme and Fiorenzato. The part references are for ECM Heidelberg P6003.10, for Marzocco H.2.002, for Fiorenzato A1200009 and for Vibiemme GUARTEF24192. This gasket has been made from PTFE.  The outer diameter...
1.36 €
compare
نظرة سريعة
Non return valve 1/8"MM Non return valve 1/8"MM

صمام عدم العودة 1/8"مم

The item on this page is a non return valve. This non return valve can be used on various coffee machine brands such as Astoria, Brasilia, ECM, ECM Heidelberg, Pavoni, Rancilio, Saeco and Vibiemme. The Astoria part reference is 20358, for brasilia it is 01119.4.00.09, for ECM C229900540, for ECM Heidelberg C229900540, Pavoni 453200 , Rancilio...
24.49 €
compare
نظرة سريعة
La San Marco 85 touchpanel La San Marco 85 touchpanel

La San Marco 85 touchpanel

This push button panel is a OEM/Original La San Marco espresso machine part.  This item is suitable for the San Marco 85 E espresso machine. You can only use this panel from 2 – 4 brewing groups. So not for 1 group model. The San Marco part number for this item is 608067. This push button panel has 5 keys in total. There are 4 pre-set dosing...
155.93 €
compare
نظرة سريعة
Safety valve 1/4" M 2.0 bar CE / PED Safety valve 1/4" M 2.0 bar CE / PED

صمام أمان 1/4 "M 2.0 بار CE / PED

The boiler safety valve on this page can be used on a variety of La Cimbali, Faema and Casadio espresso machines.  The part reference for Casadio is 532392500, for Cimbali it is 532392500/532-392-500  and for Faema it is 532392500. This boiler safety valve has a male ¼” BSP-G thread. The safety valve is not adjustable and set...
28.83 €
compare
نظرة سريعة
La San Marco steam/water valve gasket holder La San Marco steam/water valve gasket holder

لا San Marco حامل صمام البخار / الماء

This item is a OEM/Original La San Marco spare part. This item is a brass gasket holder/spring guide. In one side there can be installed a gasket of 15x5,5x4mm. On the other side you can install the valve spring. This gasket holder is used in various steam and water valves, as well in the water inlet valves. The part references for this La San Marco item...
6.80 €
compare
نظرة سريعة