Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these...

The nozzle on this product page can be used on a variety of Faema brewing groups. This nozzle has been made from a male M10 with a thread pitch of 1mm. The hole in the middle is 0,5mm. You can use this gigleur on the Faema Due, Faema E91, Faema E92, Faema E97, Faema E98, Faema Express, Faema E98 president and the Faema Smart.

The Italian solenoid manufacturer ODE is currently the only espresso machine solenoid manufacturer who makes some of their solenoid from the Techno polymer PPS. On this page you see a 3 way solenoid valve made from PPS with the part number 31APBA1R15-13T0 As mentioned before this is a 3 way solenoid valve with a flange. This flange mates against a other...

Faema / Cimbali expansion valve

The portafilter gasket shown on this page can be used on a variety of espresso machines which use for instance a E61 style of brewing group. But this gasket hasn’t been made from the traditional NBR, but from orange food grade silicone.  You can use this portafilter gasket on various brands such as San Remo, La Scala, Vibiemme, Bezzera, Faema...

The portafilter gasket shown on this product page is one of the most common sizes found on commercial espresso machines. But this gasket hasn’t been made from NBR as traditionally done, but from food grade silicone. You can find this portafilter gasket on brands such as Faema, Vibiemme, Bezzera and La Scala. This red silicone gasket has a outer...

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this...

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm...

This small o ring can be used on various Casadio and Faema espresso machine models. This o -ring is used in various brewing groups. The part references for this item are for Casadio 402197000, Cimbali 402197000/ 402-197-000 and for Faema 402197000. This o ring has been made from FKM. This o ring has a cord diameter of 2,7mm and a internal...

The portafilter gasket ton this product page is a OEM/Original Faema spare part, but can also be used on various Casadio espresso machine models. The Casadio part reference number is 402199010, the Faema part reference numbers are402199000, 402199010 and 4701016528.  This gasket is made from NBR. The outer diameter is 74mm the inner diameter is...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

The part on this product page is a brass water filter. This filter is screwed into the espresso machine water pump. You can find this type of filter with various espresso machine brands such as Brasilia, Carimali, Casadio, Cimbali and Faema. This brass water filter has a male in and outlet, these threads are 3/8” BSP-G. Inside this brass housing is...