Parker stainless steel solenoid gasket set

The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762 You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface. This type of Allen screw is used in a lot of espresso...

On this page you will find a threaded 2 way solenoid valve. This solenoid valve is made by Parker, this item ahs been manufactured in Italy. This valve is mainly used as a boiler filling valve, due to the big size of Orifice. This valve has 2 female 1/8” BSP-G connections, the in as well as the outlet. The orifice of this valve is 2,5mm and the...

On this page you will find a 2 way solenoid valve manufactured by the company Parker, this specific valve has been produced in Italy. This solenoid valve is mainly used as a water inlet valve and a steam and water valve solenoid. The Parker part numbers for this item are 397442 and 397443. This solenoid valve is a version which has a female threaded in...

The solenoid on this page is quite a typical 2 way flanged solenoid valve which can be used on for instance a water inlet valve. This valve is manufactured by the company Parker in Italy. The Parker part number for this item is 393232J This specific model of solenoid valve is a flanged model, these models seal at the bottom with 2 o rings to a other...

On this page you will find a solenoid valve made by the parker company. This specific solenoid valve is a 3 way valve. The Parker part numbers for this item are 393117J and 393122J This specific 3 way valve is one of the flanged series. This flange seals off with 2 small o rings.  The valve runs on 230V at 50/60Hz, the coil used on this valve is the...

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...

Parker 2 way stainless steel solenoid valve 220/240V 50/60Hz Dn2.5mm. Stainless steel pilot and special seals FDA - Ruby, 0-10 bar

The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100 As mentioned...