This Procon rotation pump is slightly different then most pumps made for the espresso machine market by Procon. This pump is only suitable for a selection of coffee machine brands. The Procon part number for this item is 112T060F123B130
As mentioned earlier this is a bolt on espresso machine pump. The motor has a flange with bolt holes in in it. You only have to loosen the bolts so the hooks can grab behind the threads and then tighten the bolts. And your done.
This clamp on pump has a flow rate of 180 L/H and has been fitted with a balanced bypass. The brass fittings on this pump are 3/8” conical NPT fittings. Instead of the ones used with Fluid o tech and Nuert 3/8” BSP.
You can adjust the pump pressure with the scre on the side of the pump. When you screw it in the pressure increases and when you unscrew it the pressure decreases.
The Procon pump has also been nsf certified.
The shaft used on this a lot smaller then with “standard” espresso machine pumps. You will only find this type of shaft with the brands of the La Cimbali group. So with coffee machine brands like Casadio, La Cimbali and Faema.
A other thing which is unique to this type of pump is that it uses a pump coupling to transfer the rotation from the motor to the pump. This 40mm coupling(for a Faema E61 legend it is a 35mm coupling). These metal couplings inner and outer are connected to each other with a rubber disc inbetween.
The item on this product page is a steam valve knob insert. This white steam valve insert can be used on espresso machine brands such as Marzocco and Faema. The Faema part reference for this item is 4831131214, for Marzocco the part reference number is L165/MV.
This steam valve insert is made from a white plastic. The item itself has...
On this page you will find a brass brewing group plug. The outer diameter of this plug is 18mm. This plug is used to seal off the nozzle/gigleur compartment. You will find this part on a variety of brewing groups.
Brands like Bezzera (5288001) Brasilia (0210600004 ) la Pavoni (313600) and wega espresso machines.
If you are not entirely sure if this...
The item on this product page is a main power switch which is used on various La Spaziale espresso machines. This switch is made by the dutch company Giovenzana. The La Spaziale part reference number fort his item is 02620
This switch is rated up to 20A at 600V. The switch has a 0 and 1 position. The shaft is 5x5mm. This switch has been made in...
On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
This pressure gauge is a original La San Marco spare part. This manometer is a boiler pressure gauge. The La San Marco part reference number for this item is 202003.
This boiler pressure gauge has a dial indicator range from 0 up to 3 bar. The fitting on the back is a male ¼”. The frame has a diameter of 56,6mm and the body is 52mm....
