براز 1/4 لقبعة اللحام 6 ملم

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. Welding cap nuts can be interchangeable for various sizes of welding end caps. On this product page you will find the smallest size of welding cap...

Cimbali/Faema bicone nut ¼” hole

Bicone soldering fitting 6mm tubing

Cimbali/Faema bicone soldering cap 8mm tube

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. This size of welding end cap is mainly used for making tubing for pressure switches. So...

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. This type of welding end cap is slightly different then the standard types of caps. To start, this welding end cap is a male thread instead...

Bicone soldering fitting 8mm tubing

This messing brass nut is used in combination with a solder fitting. The thread on the inside is a female 3/8” BSP-G thread. The height of the nut is 16mm and the central hole for this nut is 10mm. This brass solder nut can be used in combination with for instance a 10mm bicone tube fitting or with the ogive welding cap which has a outer diameter of 10mm,...