Lever switch 16A 250V
search
  • Lever switch 16A 250V
  • Lever switch 16A 250V

مفتاح رافعة 16A 250 فولت

15.25 €
شامل للضريبة

12.60 € بدون ضرائب.

الكمية

compare
  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

This classical style of on/off switch can be used with brands such as ECM Heidelberg and Vibiemme. The ECM Heidelberg part reference is C199900087 and the Vibiemme part reference is ELETINTLEVMET.

This switch is a toggle switch which has been rated up to 16A at 250V. The hole diameter for this switch is 12mm.

You can use this switch on the Vibiemme Domobar Junior, ECM Heidelberg Elektronika II Profi, ECM Heidelberg Elektronika Profi and the ECM Heidelberg Mechanika.

ECM
55-011
11 عناصر

البيانات

ECM هايدلبرغ
Elektronika II Profi
Elektronika Profi
Mechanika
الجهد االكهربى
250V
امبير (A)
16A
رقم القطعة
ECM heidelberg C199900087
Vibiemme ELETINTLEVMET
فيبييمي
Domobar Junior
ماركة
ECM
Vibiemme
نوع الكهرباء
Switch
Can I use the Bezzera BZ10 espresso machine for commercial purposes? insert_link

We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.

What kind of temperature control mechanism does the Bezzera BZ10 have? insert_link

Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.

What kind of brewing group does the Bezzera BZ10 have? insert_link

This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.

Is the Bezzera BZ10 espresso machine fitted with a water tank or a main water connection? insert_link

The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.

How do I check the pressure of my Bezzera BZ10 espresso machine? insert_link

The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.

التعليقات (0)
لا يوجد تعليقات عملاء هذه اللحظه.

8 غيرها من المنتجات