0
My cart
Boiler top fitting 1/2"
€15.17
€12.54 tax excl.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC.
This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a ½” BSP-G.
But this fitting is most common with Vibiemme and La Pavoni. You will find them in models such as Vibiemme Domobar, Vibiemme Dosaplus, Vibiemme Lollo, Vibiemme Minimax, Vibiemme Evolution, Vibiemme Mercury. For the models of la Pavoni you need to think off Pavoni Bar, Pavoni Bart, Pavoni Café, Pavoni Pub and so on.
If you are not sure if this brass boiler fitting is suitable for your espresso machine, just send a message and we might be able to help.
28-002-L-1349014
1 Item
Data sheet
- Brand
- Grimac
La Pavoni
Vibiemme - Country of manufacturing
- Made in Italy
- Fitting thread 1
- 1/2" M
- Fitting thread 2
- 1/2" M
- Grimac
- Eclisse
Ten
Twenty
Zola-I
Zola-II - La Pavoni
- Bar
Bart
Cafe
Pub - part number
- BFC 3510005
Brasilia 07407.0.00.04
Expobar 30000200
Fiamma 5.0.000.0720
Gaggia WGA8001010000
Grimac GRC603
Pavoni 312028
Saeco WGA8001010000
Scala R6
Vibiemme RACCP427 - Type part
- Boiler fitting
- Vibiemme
- Chimaera
Cubo
Domobar
Domobar Junior
Domobar Super
Dosaplus
Evolution
Kometa
Lollo
Mercury
Minimax
Replica
Revolution
Silver
Comments (0)
No customer reviews for the moment.
8 other product
Puly grind cleaning crystals
How often do you clean your grinder internally as a barista? Probably not often, but it’s really easy with Puly Grind Crystals. These crystals are super concentrated, without any gluten and other allergenics. The Puly grind Crystals come in a box of 10 satchels, but you only need 1 per use. When using the Puly Grind Crystals on your coffee grinder...
€13.79
Vibiemme infusion valve 62mm
This brewing valve is a complete valve assembly suitable for the Vibiemme E61 style lever brewing group.This complete valve exists out of 5 components. The triangular rod, a gasket holder, the gasket, a small brass washer and the square valve pin. All espresso machine parts make the total length of the valve assembly 62mm.The Vibiemme part number for this...
€14.68
ECM doser control box 1 group
The level regulator can be used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number for this item is M2004
This Gicar level regulator is called the Dosatura Manuale Deluxe SSR 230Vac. Which has the Gicar part reference number of 9.9.36.12G00.
This level regulator can be used on the ECM Heidelberg Mechanika, ECM...
€352.79
Nipple brass 1/8"M x 1/4"M
This type of fitting is a reduction. From 1/8 to ¼ and can be used on numerous espresso machine brands such as Marzocco, Grimac, La Scala, Astoria, Spaziale, Wega, Pavoni and Rancilio. The part reference numbers can be found in the extra info tab.
This fitting is made from machined brass. On one side is a male 1/8” BSP-G on the other side is a male ¼”...
€3.34
O ring gasket 48,9x2,62mm epdm
The o ring on this product page can be used on various La Carimali espresso machines. The Carimali part reference numbers for this o ring are 87.00111 and 87.00111.00.19
This o ring has been made from the material EPDM. The cord diameter is 2,62mm and the internal diameter is 48,89mm. This o ring has been made in Italy.
This o ring can be used on various...
€1.52
Faema Cimbali Solenoid valve drain fitting
The item on this page is a drain hose fitting connector for a variety of Faema and Cimbali espresso machines. The Faema part reference number for this item is 937055010.
This fitting is screwed onto the brewing group solenoid valve. The female thread is 1/8”. The side where the hose needs to placed has a diameter of 6mm. this item is made in Italy....
€7.74
