Faema - Boiler

The anti-vacuum valve on this page can be used on various espresso machine models of the brand San Remo. The anti vacuum valve has the San Remo part reference of 10652040A  This anti vacuum valve has been made from stainless steel. The thread used is a male ¼” BSP-G thread. This stainless steel anti vacuum valve has been made in Italy...

The boiler temperature sensor/probe on this page can be used on various Faema espresso machines. The Faema part reference for this sensor is 3761132007. This temperature probe has a male ½” fitting. The bulb itself has a diameter of 10mm and a length of 36mm. This sensor has been made in Italy. You can use this temperature probe on various espresso Faema...

A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the gasket on it,...

Faema E61 boiler 1 group 9L

Faema ariete aluminium boiler ring 16 holes 246X210X10mm

The boiler gasket on this page is used on various older models of Faema espresso machine boilers. This gasket has a outer diameter of 150mm a inner diameter of 137mm and a thickness of 3mm. this gasket has been made in Italy. You can use this boiler gasket on the Faema P4, Faema P6, Faema E64 and the Faema E66.

The boiler gasket on this page can be used on various older Faema espresso machines. The most famous of them is the Faema E61. This boiler gasket is used in combination with the boilers with the aluminium boiler flanges. This gasket has a outer diameter of 245mm a inner diameter of 205mm and a thickness of 2mm. This gasket has 2 side which have been...

The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0 bar, this...

The early models of Faema used a double flange system on their boilers. You would have a heating element flange and a water level flange. These flanges had a gasket to seal off the boiler. To spread the pressure equally over the gasket a inner and outer ring are placed. This ring prevents the deformation of the copper boiler flange and side flanges. Over...

The heating element gasket on this page can be used on a variety of heating elements. This gasket has a outer diameter of 57mm a inner diameter of 43mm and a thickness of 3mm. The fibre material used is AFM 34 made by the German company Victor Reinz. This gasket material is food safe and can handle the pressure and temperatures which occur in every...

Faema E61 aluminium boiler ring 12 holes 246X210X10mm

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...