Filter by
Type part
more... less
Type
Price
Filter

La Cimbali M31 parts

La Cimbali M31 espresso machine parts

The La Cimbali M31 is one of the older espresso machine models. There are variety of versions of this model. As well as the number of groups.

The La Cimbali M31 has been build in the following versions:

La Cimbali M31 Bistro;

La Cimbali M31 Classic;

La Cimbali M31 Dosatron.

 

La Cimbali M31 Bistro.

The La Cimbali M31 Bistro is a small body 1 and 2 group volumetric espresso machine. It is ideally when there is limited space available. This Model is only available in a volumetric.

There are versions with a vibration pump, but also ones which have a rotation pump installed. The other thing is that this machine has a also a tank version, so there is no main water inlet required.

La Cimbali M31 Classic.

The La Cimbali M31 classic is the basic model of the La Cimbali M31. This is a not volumetric espresso machine. The machine is available from 2-4 brewing groups and in the additional colours silver and gold. The M31 classic only comes with a rotation pump

La Cimbali M31 Dosatron.

The la Cimbali M31 Dosatron is the volumetric version of the M31 series. This espresso machine does have flowmeters installed, including the additional electronics for this. This machine was available from 2 – 4 brewing groups and as well in the additional colours gold and silver.

La Cimbali M31 espresso machine parts

Cimbali water level probe 1/8"M 108mm

The level probe on this page is used on various La Cimbali espresso machine models. This level probe is used the flange of the boiler instead on the top of the boiler. The part references can be found in the extra info tab. The level probe itself has been made from stainless steel. There is a PTFE insulator and a brass boiler fitting. This is a male...
€34.65

Portafilter gasket shim 70x57x0,8mm

On this product page you will find a paper seal for a portafilter gasket. This model of paper shim can be used on a variety of brands of espresso machines such as Casadio, Cimbali, Astoria, Nuova Simonelli, Wega and Brasilia. What does a paper shim do? The brewing group ring and portafilter ears wear down over time, to compensate this there are paper...
€0.58

Gicar flowmeter 1/8" 1,15mm connector with led

On this page you will find a flowmeter made by the Italian company Gicar. This specific model of flowmeter can be used with a variety of brands such as San Remo, La Cimbali, Nuova Simonelli and Brasilia. The Gicar part numbers for this item are (9.0.25.50G, 9.0.96.50G and 9.0.55.50G) The fittings which can be used on the in and outlet of flowmeter are...
€60.67

Faema pump motor Due E91 diplomat 170W 220V

On this page you will find a motor mainly used for older model espresso machines from Faema like: Faema Due, Faema E91, Faema E92, Faema Star and Faema Tronic. This motor is build by the Italian company Elettromeccanica ing. F. Arduini. This is a 170W pump motor which runs on 220V with 50/60hz. To start the motor you need a start capacitor, on this...
€261.05

Faema motor flange pump connector set

With Faema and La Cimbali flange pumps there is a additional coupling between the flanged motor and the flanged pump. This coupling is made of 2 metal couplings. 1 connects to the espresso machine motor shaft, the other connects to the pump. Note: this coupling has a round shaft opening with a flat side. The metal connectors have a OD of 40mm. In between...
€14.22

Asco pressure switch P303/T01 3 phase 20A

The P303T01 a more lightweight 3 phase pressure switch then the Asco P302/6 3 phase pressure switch. The difference is also that the P302/6 has a partially metal cover. And the P303T01 has a full plastic cover. This pressure switch has been used espresso machines like: Bianchi, Fiamma and Orchestrale.Nowadays these pressure switches are named Asco, in...
€94.94

La Cimbali gigleur 0.5mm

The nozzle/gigleur is used on a couple of Cimbali brewing groups. This nozzle is not located inside the brewing group, as you see with most gigleurs. But it is installed inside the tubing at the flowmeter or close to the brewing group. This item has multiple part numbers you will find those at the extra info tab. This gigleur has a outer diameter of 14mm...
€11.69

Cimbali portafilter holder coupling

At some point the portafilter coupling of your espresso machine will wear out, or the finish will go bad. That would be the time to replace it. This specific model is one used on various La Cimbali espresso machines. The parts reference numbers for this item are 457299017, 457-299-017, 457299027  and 457-299-027. This portafilter coupling is...
€152.51

La Cimbali filterbasket 1 coffee 6gr

The filterbasket on this page is for 1 coffee dose. This item is used on La Cimbali espresso machines. The La Cimbali part reference for this item is 457232000 and 457-232-000. This filterbasket has been made by the Italian company IMS Filtri, the part reference is GC1T043. This filterbasket holds about 6 grams of ground coffee. The outer diameter...
€4.37

Shower screen 51,5mm

The shower screen on this page is made by the Italian company IMS Filtri, no this is not a competition shower. But they also make standard shower screens. This shower screen can be used on a variety of brewing groups. Like on the ones of Reneka, Carimali, Bezzera, Grimac, Astoria, Wega and Elektra. The external diameter of this shower screen is 51,5mm...
€5.46