Filter by
Manufacturers
Type part
more... less
Type
Price
Filter

La Cimbali M31 parts

La Cimbali M31 espresso machine parts

The La Cimbali M31 is one of the older espresso machine models. There are variety of versions of this model. As well as the number of groups.

The La Cimbali M31 has been build in the following versions:

La Cimbali M31 Bistro;

La Cimbali M31 Classic;

La Cimbali M31 Dosatron.

 

La Cimbali M31 Bistro.

The La Cimbali M31 Bistro is a small body 1 and 2 group volumetric espresso machine. It is ideally when there is limited space available. This Model is only available in a volumetric.

There are versions with a vibration pump, but also ones which have a rotation pump installed. The other thing is that this machine has a also a tank version, so there is no main water inlet required.

La Cimbali M31 Classic.

The La Cimbali M31 classic is the basic model of the La Cimbali M31. This is a not volumetric espresso machine. The machine is available from 2-4 brewing groups and in the additional colours silver and gold. The M31 classic only comes with a rotation pump

La Cimbali M31 Dosatron.

The la Cimbali M31 Dosatron is the volumetric version of the M31 series. This espresso machine does have flowmeters installed, including the additional electronics for this. This machine was available from 2 – 4 brewing groups and as well in the additional colours gold and silver.

La Cimbali M31 espresso machine parts

Safety valve 3/8" 1,8bar CE PED IV

The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE and PED...
€10.58

La Cimbali and Faema toroidal transformer 240V

The item on this page is a toroidal transformer and is used with a variety of espresso machine models of La Cimbali and Faema. This transformer runs on 240V at 50/60Hz and will reduce the voltage to be used on the electronics. The device does come with connecting wiring. You will see this device only used by the la Cimbali group. You can use this toroidal...
€322.95

Ulka vibration pump damper 90degree

On this page you will find a rubber support mount for a vibration pump. This support has 1 central hole and a mounting hole. The mounting hole is for connecting the rubber pump support to the frame of the espresso machine. The other hole is for sticking the espresso machine vibration pump true, this is a press fit. For each vibration pump you need 2...
€2.77

Fluid o tech flange pump 150 L/H

On this page you will find a clamp on rotation pump. This specific model Compact Plus (MO0154EAADN) has been made by the Italian company Fluid o tech in Italy. This type of coupling is only used with a couple of coffee machine brands, which are all part of the La Cimbali Group. So, you will find them with the espresso machines Casadio, La Cimbali and...
€133.03

Wera shower screen screwdriver slotted

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€11.50

Cimbali/Casadio retaining ring steam and water valve

On this page you will find a bore retaining ring for steam and water valves used by the La Cimbali group. This item is a OEM/Original part. The item is used hold the steam/water shaft inside the valve. You are unable to completely turn out this shaft. This retaining ring has a outer diameter of 23,5mm. the ring has been made out of steel spring C80...
€2.21

Boiler safety valve 3/8" 1.8 bar CE-PED

The boiler safety valve shown on this page can be used on wide selection of espresso brands such as Brasilia, Wega, Astoria, Grimac, Cimbali, Faema, Marzocco and Carimali. The part references can be found on the extra info tab. This boiler safety valve has a male 3/8” BSP-G thread. The safety valve has been set at 1,8 bar, this is not adjustable. When the...
€22.82

3 phase safety thermostat 169-18°

On this page you will find a three phase thermostat. This item is used in a variety of espresso machines. You can find this thermostat with brands like Cimbali Faema and Casadio. This 3 phase thermostat is made by the German company E.G.O. in Germany. The switching off temperature of this thermostat is 169°C and needs to be reset manually by pushing the...
€69.02

Cimbali AFM34 heating element gasket 58X50X2mm

The heating element gasket on this page can be used in a variety of espresso machine models made by Casadio and Cimbali. The Casadio part number is 401194010 and the Cimbali part number is 401-194-000. This gasket has been made from AFM34 by Victor Reinz. This gasket has a outer diameter of 58mm a inner diameter of 50 mm and a thickness of 2mm. The gasket...
€2.12

La Cimbali/Faema power relay 24Vac

The relay on this page is suitable for various La Cimbali and Faema espresso machines. The La Cimbali part reference for this item is 531505200/531-505-200, for Faema the part reference is 531505200. This relay has been manufactured by the company Finder. The Part name is 65.31.8.024.0309. This relay is a 24Vac 50/60Hz. There is 1 contact normally...
€50.65

La Cimbali pressure switch

The pressure switch on this page is one used on various older La Cimbali espresso machines. You will also only see this model on La Cimbali and some Faema espresso machines. This item is compatible with the Cimbali part references 468901022, 468-901-022, 537030700, 537-030-700 and 537-030-710. The Faema part references for this item is 468901022,...
€296.68