La San Marco - manual group 02

The single filterbasket on this page can be used on La San Marco espresso machines. The La San Marco part reference for this filterbasket is 202122. This filterbasket has been made by the Italian company IMS Filtri. The part reference from IMS is SM1T118. This single coffee filterbasket has a outer diameter of 66mm and a height of 25,5mm. This...

This item is a conical PTFE gasket. This gasket is used with various brewing groups of La San Marco. The part references for this item are 106151 and CMPTOR0020. This conical gasket has been made from PTFE. The outer diameter of this gasket is 10mm. the inner diameter is 4mm and the thickness is 6mm. This gasket has been made in Italy.  This...

The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...

The item on this product page is a flat gasket used on the lever brewing groups of La San Marco. The La San Marco part reference numbers for this item are 109059 and CTSGUA0190. This flat gasket is made from EPDM. The outer diameter is 16mm, the inner diameter is 5mm and the thickness is 4mm. This gasket has been made in Italy.

The item on this product page is a OEM/Original La San Marco spare part. This is a sliding bushing used on the manual brewing groups, so not the leva brewing groups. The part reference number for this item is 205175. This sliding bush is made from brass. and has a diameter of 7x10mm.

On this product page you will find a bottomless portafilter suitable for the La San Marco brewing groups. La San Marco is the only commercial brand which uses the 3 ear configuration instead of the standard 2 ear configuration. This portafilter has been manufactured in Italy. The thickness of the ears on the bottomless portafilter are 7mm instead of the...

This group gasket is used in various older La San Marco espresso machines. This gasket goes between the brewing group and the shower holder plate itself. There is no part reference number available for this item. This gasket is made from a universal type of carbo gasket material. The outer diameter is 51mm the inner diameter is 19mm and the thickness is...

La San Marco PTFE HX gasket 34x27x2mmReturn to the  San Marco group parts overview

On this you will find a paper seal/shim or filler. These paper shims are a handy and cheap solution to fix your portafilter gasket problems. When you use your portafilter the lugs and the bayonet like system of the group wear. So when you use a standard thickness of portafilter gasket it is possible that your portafilter doesn’t seal or goes too...

The portafilter gasket on this page is a OEM/Original San Marco spare part. The part reference for this item is 109130  The gasket has been made form NBR. The outer diameter is 64mm, the inner diameter is 52,5mm and the thickness is 5,5mm. The gasket has on the outside external cuts. This gasket has been made in Italy. You can use this gasket on San Marco...

The handle knob on this page can be used on Faema E61 brewing groups. This handle goes on the brewing group control lever. Originally these were made from Bakelite, but nowadays that isn’t made that much anymore. The Faema part reference fort his item is 4741135910  This plastic lever brewing group handle is made from a shiny plastic. In the...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...