La San Marco - manual group 02

The single filterbasket on this page can be used on La San Marco espresso machines. The La San Marco part reference for this filterbasket is 202122. This filterbasket has been made by the Italian company IMS Filtri. The part reference from IMS is SM1T118. This single coffee filterbasket has a outer diameter of 66mm and a height of 25,5mm. This...

The item on this product page is a flat gasket used on the lever brewing groups of La San Marco. The La San Marco part reference numbers for this item are 109059 and CTSGUA0190. This flat gasket is made from EPDM. The outer diameter is 16mm, the inner diameter is 5mm and the thickness is 4mm. This gasket has been made in Italy.

On this product page you will find a portafilter gasket suitable for a variety of La San Marco brewing groups. The La San Marco part reference for this item is 109011. This gasket has been made from NBR. The filter holder gasket has a outer diameter of 64mm a inner diameter of 52,5mm and a thickness of 5,5mm. This gasket has 3 external cuts and has been...

The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...

On this product page you will find a bottomless portafilter suitable for the La San Marco brewing groups. La San Marco is the only commercial brand which uses the 3 ear configuration instead of the standard 2 ear configuration. This portafilter has been manufactured in Italy. The thickness of the ears on the bottomless portafilter are 7mm instead of the...

La San Marco PTFE HX gasket 34x27x2mmReturn to the  San Marco group parts overview

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

On this you will find a paper seal/shim or filler. These paper shims are a handy and cheap solution to fix your portafilter gasket problems. When you use your portafilter the lugs and the bayonet like system of the group wear. So when you use a standard thickness of portafilter gasket it is possible that your portafilter doesn’t seal or goes too...

The item on this product page is a OEM/Original La San Marco spare part. This is a sliding bushing used on the manual brewing groups, so not the leva brewing groups. The part reference number for this item is 205175. This sliding bush is made from brass. and has a diameter of 7x10mm.

The portafilter gasket shown on this page can be used on a variety of San Marco espresso machine brewing groups. But the traditional gaskets are made from NBR, but this model has been made from food graded Silicone. The Rancilio part reference for this model of portafilter gasket is 109011 and 109130  This blue silicone portafilter gasket has a...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

The portafilter gasket on this page is a OEM/Original San Marco spare part. The part reference for this item is 109130  The gasket has been made form NBR. The outer diameter is 64mm, the inner diameter is 52,5mm and the thickness is 5,5mm. The gasket has on the outside external cuts. This gasket has been made in Italy. You can use this gasket on San Marco...