This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J
This solenoid valve is a 3 way valve. The type is a flanged type, to seal off the solenoid there are 2 small o rings at the bottom. The drain side is a male 1/8” BSP-G thread which has a conical shape. The coil used on this valve is a 220/230V version, which uses 9 W. The coil number is a ZB09.
The orifice inside this valve is 1,3mm and is sealed off with a Ruby seal.
The pressure and temperature limits of this vary. The minimum temperature is -30 degree Celsius and the maximum fluid temperature is 140 degree Celsius. The maximum working pressure for this valve is 20 bar.
20-028-L-1120335
Data sheet
Astoria CMA
Adria
Argenta
Brava
CK
CKE
CKX
CKXE
Denise
Dora
Lisa
Pratic
Pratic new
Vania
Bezzera
B2000
B2006
B3000
B6000
Ebbis
Ellisse
Brasilia
Century
Gradisca
Portofino
Country of manufacturing
Made in Italy
Faema
Compact
Due
Due A
Due S
E91
E92
E97
E98
Express
Faema E61 Jubilé A1
Faema E61 Jubilé A2
On this page you will find a Parker 2 way solenoid valve. This solenoid valve can be used on Astoria (18159002), San Remo (10303093A) and Wega (WY18159002) water inlet valves. The Parker part number for this solenoid valve is 2019F1GRG7XS03XS6
This 2 way solenoid valve is of the new design, so no brass base but a stainless steel one which is NSF...
On this product page you will find a parker 3 way solenoid valve which is slightly different then a conventional solenoid valve. This solenoid valve is mainly used on solenoid brewing groups of the brand Vibiemme. What makes it so different? This solenoid valve is pre-wired. The Parker part numbers of this item are 393134J and 393395J
This solenoid valve...
The solenoid on this page is quite a typical 2 way flanged solenoid valve which can be used on for instance a water inlet valve. This valve is manufactured by the company Parker in Italy. The Parker part number for this item is 393232J
This specific model of solenoid valve is a flanged model, these models seal at the bottom with 2 o rings to a other...
On this page you will find a threaded 2 way solenoid valve. This solenoid valve is made by Parker, this item ahs been manufactured in Italy. This valve is mainly used as a boiler filling valve, due to the big size of Orifice.
This valve has 2 female 1/8” BSP-G connections, the in as well as the outlet. The orifice of this valve is 2,5mm and the...
The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100
As mentioned...
The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762
You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface.
This type of Allen screw is used in a lot of espresso...
The item on this product page is a OEM/Original San Remo spare part. This specific item is a solenoid valve. The San Remo part reference number for this item is 10303034A
This solenoid valve is a 2 way model. The coil used is a 24VDC. The fittings on either sides is a female 1/8”. The orifice in the middle of the valve has a diameter of...
On this page you will find a 2 way solenoid valve made by the company Parker. This specific Parker 2 way solenoid valve is used with various brands as a water inlet valve for filling the boiler. The Parker parts number for this item is 393233J
This 2 way solenoid valve is one of the types which has a flange model, this model is sealed with...
