This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J
This solenoid valve is a 3 way valve. The type is a flanged type, to seal off the solenoid there are 2 small o rings at the bottom. The drain side is a male 1/8” BSP-G thread which has a conical shape. The coil used on this valve is a 220/230V version, which uses 9 W. The coil number is a ZB09.
The orifice inside this valve is 1,3mm and is sealed off with a Ruby seal.
The pressure and temperature limits of this vary. The minimum temperature is -30 degree Celsius and the maximum fluid temperature is 140 degree Celsius. The maximum working pressure for this valve is 20 bar.
Looking for similar items or different specifications for this Parker 3 way solenoid valve 220/230V?
Explore our full range in the Astoria, Bezzera, Brasilia categories
*
This part is compatible to the original part number. Part numbers are always leading.
This valve body is made by the company Parker and it is a 3 way valve, with the part number PM128IV.5. The drain side is a 1/8”bsp-g thread and has a conical shape. The plunger inside the coil is rated up to 20bar. This plunger is sealed of with a FKM gasket. This gasket seals off the central hole, orifice, which has a diameter of 1,3mm. The entire body...
This coil is made by parker, but can also be found on various Lucifer solenoid valves. This specific solenoid coil has the part number 483510P0. This specific coil is a 24V 50/60hz version, which produces 9w.
The coil itself has 3 connectors. The width is 32mm, the height is 37mm and the length is 43mm. This product is made in Italy.
The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100
As mentioned...
On this page you will find a 3 way solenoid valve made by the company Parker. This specific model is a 24V AC 3 way valve. Which can be used on some Faema and San Marco brewing groups. The parker part number for this item is 393110J
This solenoid valve is a flanged 3 way valve. The flange is sealed off with the 2 o rings at the bottom of the valve....
This diaphragm is made by the company Parker, it is model PM7321, formerly PM133. This diaphragm has the Parker part reference numbers: 306120, 306120P and 306120SP
This parker solenoid valve body is a 3 way valve body. This specific model is called the 3019F1LRG7. This valve body is made from stainless steel and is nsf certified. The valve has a inlet port which has a diameter of 2,5mm. this is sealed off with a plunger with a ruby seal. This plunger is rated up to 14 bar. The exhaust section of the solenoid valve...
On this solenoid valve is a Lucifer/Parker 3 way solenoid valve which is used on various espresso machine models of Rancilio, the reference part number for Rancilio is 34040024.
This brewing group solenoid valve is a flanged 3 way solenoid valve. The coil used on this solenoid valve is a 24V DC 9W coil, with the part number 481865C2. The outlet on top of...
The item on this product page is a OEM/Original San Remo spare part. This specific item is a solenoid valve. The San Remo part reference number for this item is 10303034A
This solenoid valve is a 2 way model. The coil used is a 24VDC. The fittings on either sides is a female 1/8”. The orifice in the middle of the valve has a diameter of 1,5mm. This valve...
