On this product page you will find a parker 3 way solenoid valve which is slightly different then a conventional solenoid valve. This solenoid valve is mainly used on solenoid brewing groups of the brand Vibiemme. What makes it so different? This solenoid valve is pre-wired. The Parker part numbers of this item are 393134J and 393395J
This solenoid valve is a 3 way brewing group solenoid valve. This model is a 220/230V at 50/60Hz. The coil used on this valve is the 9W YB09, this coil comes with wiring loom.
The drain on top of the valve is a conical 1/8” BSP-G. The orifice in the valve has a diameter of 1,3mm, this orifice is sealed off with a ruby seal.
The maximum operating pressure of this valve is 20 bar. The minimum fluid temperature is -30 degree Celsius and a maximum of 140 degree Celsius.
You can use this solenoid valve with the VBM Chimaera, VBM Cubo, VBM Domobar, VBM Dosaplus, VBM Merucry, VBM Replica, VBM Revolution, VBM Lollo, VBM Kometa, VBM Minimax, VBM Silver and the VBM Evolution.
Every espresso machine uses a expansion valve in some sort of a way. This specific model can be used on various Vibiemme espresso machines. The VBM part reference number for this item is ASSVALVESPEVO.
This expansion valve has a male thread of ¼”. The expansion valve is adjustable and can be adjusted between 8 and 14 bar. The seal inside this valve is...
The level probe on this page is made by the Italian company Gicar. This level probe is used in a variety of espresso machines such as San Remo, Grimac and Astoria. The Astoria reference is 20258, the Grimac reference is GR212 and the San Remo part reference is 10112042. The Gicar part reference for this item is 9.0.81.02G
The level probe shown on...
The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Casadio, Brugnetti, ECM Heidelberg, San Remo, Faema, Vibiemme, La Scala, Grimnac. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T068. Note: this is not a competition...
On this page you will find a boiler contact thermostat. This boiler contact thermostat is suitable for a variety of brands like Bezzera, la Marzocco and Vibiemme.
But what does a boiler contact thermostat do. Well a contact thermostat is fitted against the object with it’s metal bottom side. When the temperature off a boiler becomes above the 130 degree...
The brass water inlet valve washer on this page is a OEM/Original Vibiemme espresso machine part. The part reference for this item is VITERON31MER
This brass washer has a outer diameter of 14mm a inner diameter of 1mm. This washer has been made in Italy.
You can use this washer on the Vibiemme Cubo, Vibiemme Dosaplus, Vibiemme Minimax, Vibiemme Kometa,...
The item on this page is a complete water stem. This item can be used on variety of espresso machines such as San Remo, Vibiemme, La Scala, Grimac, Pavoni, Rocket and Gaggia.
This water stem has a 1/8” BSP-G female thread. The water stem does have the filter membrane inside, this can be replaced. The item has been made in Italy.
This water stem can be...
The sight glass on this page can be used on various Vibiemme espresso machine models. The Vibiemme part reference for this item is MATECVELI140
This sight glass has a outer diameter of 11mm and a overall length of 140mm. this sight glass has silk printing on the glass. There is on the back a red line and on the front the lettering of max and min....
On this product page you will find a heating element suitable for various Vibiemme espresso machines. The Vibiemme part reference of this item is ELETRES2G2722. This heating element is suitable for a 2 group Vibiemme espresso machine.
The element produces 2700W at 230V, there are 4 connecting poles. The immersed length of this element is 250mm. The...
