Filterholder gasket 73x57x8mm
search
  • Filterholder gasket 73x57x8mm

Filterholder gasket 73x57x8mm


€4.08

€4.08 tax excl.

qty

  GDPR Compliance

Protecting your personal data

  Shipping policy

Everything about shipping your order

  Return policy

all the inns and outs about our return policy

On this page you will find a portafilter gasket suitable for a variety of brands such as Faema, San Remo, Cimbali, Vibiemme, La Scala, Bezzera, Pavoni and Isomac.

This portafilter gasket has been made from NBR. The outer diameter is 73mm the inner diameter is 57mm and the thickness of this gasket is 8mm. This gasket has been made in Italy.

You can use this gasket on brewing groups of the models such as the San Remo Milano, San Remo Treviso, Cimbali M23 UP, Vibiemme Replica, Vibiemme Domobar, Faema E61, Pavoni Bart and so on. For the complete model and part reference list check the extra info tab.

55-079-L-1186722
7 Items

Data sheet

Bezzera
Galatea Domus
Brand
Bezzera
Expobar
Faema
La Pavoni
La Scala
San Remo
Vibiemme
Country of manufacturing
Made in Italy
Faema
Compact
Due
Due A
Due S
E61
E61 Jubile
E61 legend
E64
E66
E91
E92
E97
E98
Emblema
Emblema A
Emblema S
Emblema restyling A
Emblema restyling S
Express
Faema E61 Jubilé A1
Faema E61 Jubilé A2
Faema E61 Legend S1
Faema E61 Legend S2
Faema E61 Legend S3
Smart
Smart A
Smart A restyling
Smart S
Smart S restyling
Gasket Material
NBR
La Scala
Butterfly
Carmen
Eroica
Iris
Norma
Tosca
part number
Astoria 12225
Bezzera 5493039
Cimbali 402-199-010
Conti 2700
Expobar 75000081
Faema 4701016528
Grimac 1110600015
Grimac F015
Isomac IS351030
Pavoni 361008
San Remo 10502110
Vibiemme GUARSOT
Portafilter gasket inner dimension (mm)
57
Portafilter gasket outer dimension (mm)
73
Portafilter gasket thickness (mm)
8
San Remo
Amalfi
Capri
Milano LX
Pisa
Treviso
Treviso LX
Verona
Verona RS
Zoe
Zoe compact

Well that answer is pretty simple, no it isn’t. The original valve works as following, when you turn the shaft inwards the valve pin will push a gasket holder. The steam can go out, close it again and no steam can go out. In the case of the modern E61 valves is that behind the gasket holder is a small stainless steel ball with a spring.

From the beginning of the Faema E61 brewing group are basically no differences between the parts installed inside the brewing group. Parts such as the valve gaskets, springs, valve assemblies and portafilters have all remained the same. The biggest change is the small cleaning hole on the front of the brewing group. With the earliest models this hole didn´t exist.

There are 5 types of boiler used on the Faema E61 espresso machine. The most well known is the double flanged model. You have on one side the heating element flange and on the other side the water level flange, both are out of production. These are held in place with aluminium boiler rings. For the single groups you have a boiler with a flange on one side.

The next model is a stainless steel boiler, with one flange. This type of boiler is less common then the copper boiler above. There is also a later model stainless steel, which doesn’t have a removable flange. Both these boilers have corrosion issues, this has to do because of the stainless steel.

The latest model is also a copper boiler, this boiler has a single heat exchanger(HX) in the middle. Most modern espresso machines have for each individual brewing group a individual HX.

Yes it is, but this depends on various factors. The first thing is experience, seen this is a manual operated espresso machine it requires a lot more attention from the barista then a solenoid operated model. There you need to stop the brewing process manually. If you don’t have the experience you probably can’t hold up with the tempo which is required at such a bar. Then I would advice to go for the Faema E61 Jubilee, this is the solenoid operated version of the Faema E61 Legend espresso machine.

Comments (0)
No customer reviews for the moment.

8 other product