Vibiemme Minimax Espresso Machine: Essential Spare Parts for Long-Lasting Performance
Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr)
The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...
€4.17
E61 style groups shower without welding 60mm
The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm
Note: this is...
€3.02
Portafilter gasket 73X57X8.5mm
This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac.
Of this...
€4.19
O ring gasket FKM 10.78x2.62mm
On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
€1.05
Silicone gasket 12.3x5.6mm
This blind gasket can be found on a variety of steam and water valves. You can find this blind gasket with brands such as La Scala, Marzocco, La Carimali, San Remo, Vibiemme, La Pavoni and BFC. The part references can be found in the extra info tab.
This gasket is made from red silicone. The gasket has a outer diameter of 12mm and a height of 5.8mm. There...
€1.08
E61 shower screen old style 60mm
This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070. The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm
Note: this is not a specialty coffee shower, but IMS also produces normal showers.
This is, unlike other 60mm models, a...
€4.29
o ring gasket 7,2X1,9mm nbr
On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore.
With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...
€0.56
Solenoid valve silicone o ring 6,07x1,78mm
This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps.
The o ring has a wire diameter of 1,78mm and a internal diameter...
€0.66
PTFE gasket 26x21x2mm
This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.38
PTFE gasket 35x30x2mm
The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
€1.47
Ffilterbasket 2 coffee 14gr 70x24,5mm
The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Brasilia, Elektra, Victoria Arduino, Faema, Cimbali, Casadio, La Scala. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T069. Note: this is not a competition filterbasket....
€5.69
Stainless steel filter 8.6x22.5mm
The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega.
This stainless steel water filter has a outer diameter of 8,5mm...
€3.47
Asco (Sirai) pressure switch P302/6
The Asco P302/6 pressure switch (formerly Sirai) is one of the most used 3-phase pressure switches in professional espresso machines. It automatically controls the boiler pressure by switching the heating element on and off at the set point. When the boiler reaches the preset pressure, the membrane opens the electrical circuit, and when pressure drops,...
€74.07
Drain valve assembly
The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm.
This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99
Brewing group gigleur 0.6mm
This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
€1.58
Tap joint spring guide
This steam pipe bushing is a important element in the sealing and functioning of a steam and water valve. This bushing is pushed down on one side with a spring, this bushing has on the other side a hollow shape so that the ball of the steam and water valve can slide smoothly over the brass.
This brass bushing has multiple dimensions. The external...
€1.20
Gasket PTFE 22x16x2mm
This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies.
The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia,...
€0.86
Ducati Energia capacitor 10μF 450V
The capacitor on this page is a 10µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.1564. This capacitor is used as a start capacitor for pump motors and as a start motor for the coffee grinder motor. This capacitor can be found with brands such as Casadio, Carimali, Vibiemme, Cimbali,...
€6.96
Filterholder gasket 73x57x8mm
On this page you will find a portafilter gasket suitable for a variety of brands such as Faema, San Remo, Cimbali, Vibiemme, La Scala, Bezzera, Pavoni and Isomac.
This portafilter gasket has been made from NBR. The outer diameter is 73mm the inner diameter is 57mm and the thickness of this gasket is 8mm. This gasket has been made in Italy.
You can use...
€5.53
Anti vacuum valve 1/4"
A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the gasket on it,...
€9.77
portafilter gasket 74x57.5x8mm
The portafilter gasket shown on this page is used with various espresso machines of the Cimbali group and with Vibiemme espresso machines. the part reference numbers can be found in the extra info tab.
This portafilter gasket has been made from NBR. The outer diameter is 74mm the inner diameter is 57,5mm and the thickness is 8mm. This gasket has 4...
€3.57
IMS E61 style shower screen
This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....
€22.75
4o mini