Filter by
Categories
Price
€ €
Filter

List of products by brand Brasilia

Brasilia espresso machines are still found in many cafés and professional coffee setups, especially as reliable “workhorse” machines built for daily service. Even when a brand has gone out of business or certain models are discontinued, the machines remain in use—and parts are still needed for maintenance and repairs.

Source compatible Brasilia replacement parts to reduce downtime, restore safe operation, and keep espresso quality consistent during busy service.

Filterholder gasket 72.5x57x8 mm Filterholder gasket 72.5x57x8 mm

Filterholder gasket 72.5x57x8 mm

The portafilter gasket on this product page can be used with a wide selection of brands. This portafilter gasket can be used on Brasilia, San Remo, la Scala, Bezzera, Faema, Vibiemme and Pavoni espresso machines. This gasket has been made from NBR. The outer diameter is 72,5mm, the inner diameter is 57mm and the thickness is 8mm. This gasket has been made...
€3.67
Quick-view
Faema E61 filterholder suplement gasket 0,8mm Faema E61 filterholder suplement gasket 0,8mm

Filterholder suplement gasket 73x59x0.8mm

The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups. What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm. What does a paper shim do? Brewing group locking mechanisms wear due to...
€0.65
Quick-view
E61 style groups shower without welding 60mm E61 style groups shower without welding 60mm

E61 style groups shower without welding 60mm

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...
€3.02
Quick-view
E61 shower screen old style 60mm E61 shower screen old style 60mm

E61 shower screen old style 60mm

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm models, a...
€4.29
Quick-view
o ring gasket 7,2X1,9mm nbr o ring gasket 7,2X1,9mm nbr

o ring gasket 7,2X1,9mm nbr

On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore. With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...
€0.56
Quick-view
PTFE gasket 26x21x2mm

PTFE gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.38
Quick-view
Ring group gasket o ring 47.29x2.62mm Ring group gasket o ring 47.29x2.62mm

Ring group gasket o ring 47.29x2.62mm

The o ring on this product can be used on various espresso machine brands such as San Remo, Elektra, Spaziale, Victoria Arduino and Brasilia. The part reference numbers can be found in the extra info tab on this product page. This o ring is made from EPDM. The cord diameter is 2,62mm, the internal diameter is 47,30mm. This item has been made in Italy....
€3.40
Quick-view
PTFE gasket 20x17x2mm PTFE gasket 20x17x2mm

PTFE gasket 20x17x2mm

This flat PTFE gasket shown on this page is used on a variety of espresso machine brands in the steam and water valves. This gasket can be used on the San Remo, Royal, Brasilia and ECM Heidelberg espresso machines. This flat PTFE gasket has a outer diameter of 20mm a inner diameter of 17mm and a thickness of 2mm. This gasket has been manufactured in...
€1.08
Quick-view
E61 style group spout breaker E61 style group spout breaker

E61 style group spout breaker

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€6.37
Quick-view
Tap joint spring guide Tap joint spring guide

Tap joint spring guide

This steam pipe bushing is a important element in the sealing and functioning of a steam and water valve. This bushing is pushed down on one side with a spring, this bushing has on the other side a hollow shape so that the ball of the steam and water valve can slide smoothly over the brass. This brass bushing has multiple dimensions. The external...
€1.20
Quick-view
Steamtube anti scorch clip Steamtube anti scorch clip

Steamtube anti scorch clip

The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube. This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with the...
€2.41
Quick-view
Heating element 1400W 230V Heating element 1400W 230V

Heating element 1400W 230V

On this product page you will find a screw in heating element which is suitable for a variety of espresso machines such as Brasilia, La Scala and Vibiemme. The part references for Brasilia are 01911.2.00.08, for La Scala C-0520 and for Vibiemme ELETRESD1422  This heating element produces 1400W at 230V, with 2 connecting poles. The immersed length of this...
€46.48
Quick-view
Shower with net and rays caulked 60mm Shower with net and rays caulked 60mm

Shower with net and rays caulked 60mm

The shower screen on this page is one of the most commonly espresso machine shower screens used in commercial espresso machines. For instance on all E61 types of brewing groups. This specific shower screen has been made by the Italian company IMS Filtri. The IMS part reference for this item is IMSDR306. Note: this is not a competition shower screen. This...
€4.10
Quick-view
Locking group gasket Locking group gasket

Locking group gasket

If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...
€5.04
Quick-view
Compression spring 14x33mm Compression spring 14x33mm

Compression spring 14x33mm

This stainless steel spring 14x33mm is used in a variety of locations in a espresso machine. The most common location for this compression spring is in a Faema E61 brewing group of a E61 style brewing group. The spring seats inside the top trumpet and makes sure that the top brewing valve closes when the brewing process is stopped, and the lever has been...
€2.17
Quick-view
Single spout small 3/8" Single spout small 3/8"

Single spout small 3/8"

This style of coffee spout is one of the smaller ones. You could have seen it on espresso machine portafilters of Carimali, San Remo, Elektra, Victoria Arduino and Brasilia. But you can use this spout on any portafilter you want of course.  The part reference for Carimali is 95.01800, for Brasilia it is 08275.0.00.04, for Elektra it is 01308021, for...
€6.84
Quick-view
Drain valve pre-assembled 52,8mm Drain valve pre-assembled 52,8mm

Drain valve pre-assembled 52,8mm

The drain valve on this page is used in a variety of E61 style of brewing groups. You will find this model of drain valve assembly on brands such as Bezzera, ECM Heidelberg, Isomac, La Pavoni, Brasilia, Grimac and Royal. This drain valve comes pre-assembled. The assembly contains the triangular shaped shaft, gasket holder, gasket, flat washer and the...
€15.01
Quick-view
Faema E61 valve rod spring Faema E61 valve rod spring

Valve rod spring 15x17mm

The compression spring on this page knows a variety of applications with various brands. You can use this spring with brands like Vibiemme, La Scala, Faema, Spaziale and Brasilia. As for instance on steam and water valves. The part references can be found in the extra info tab This stainless-steel compression spring has a outer diameter of 15mm and a...
€1.13
Quick-view
AFM 34 gasket 26x21x2mm AFM 34 gasket 26x21x2mm

AFM 34 gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.16
Quick-view
O ring 12.37x2.62mm

O ring 12.37x2.62mm

The o ring on this page can be used on various applications with a wide selection of espresso machine brands such as Faema, Casadio, Cimbali, La Spaziale, Rancilio, Brasilia. The matching part references for this o ring can be found in the extra info tab. The o ring has been made from EPDM. The cord diameter of this o ring is 2,62mm and the internal...
€1.03
Quick-view
Conical portafilter gasket 66x56x6mm Conical portafilter gasket 66x56x6mm

Portafilter gasket conical 66x56x6mm

The filter holder gasket shown on this page is used on various Brasilia espresso machine brewing groups. The Brasilia part reference for this item is 01393.0.00.02. This gasket has been made from NBR. The outer diameter is 66mm, the inner diameter is 56mm and the thickness is 6mm. This gasket is shaped conically and has been made in the EU. This...
€3.82
Quick-view
Crushable copper washer 23x17x3mm Crushable copper washer 23x17x3mm

Crushable copper washer 23x17x3mm

The crushable copper gasket on this page can be used with various applications on Brasilia espresso machines.  For instance, on sealing off steam and water tubes and as a gasket on various boiler fitting applications. The Brasilia part reference for this item is 01386.0.00.02  This copper gasket has a outer diameter of 23mm a inner diameter of 17mm and a...
€1.56
Quick-view
Brasilia sight glass 11x135mm Brasilia sight glass 11x135mm

Brasilia sight glass 11x135mm

The sight glass on this page is suitable for a variety of Brasilia espresso machine models. The Brasilia part reference for this item is00787.0.00.02. This sight glass has a outer diameter of 11mm and a overall length of 135mm. On the back is a red line to make the water level more visible. On the front is a scale with the minimum and maximum level. This...
€5.40
Quick-view
Inox ball return spring Inox ball return spring

Inox ball return spring

The spring on this product page is used for various applications with various brands. This spring is used in water inlet systems, steam and water valves and non return valves. You will find this model of compression spring with brands such as Brasilia, La Spaziale, Faema, Grimac, Vibiemme and La Scala. This stainless steel compression spring has a outer...
€2.01
Quick-view

Keeping discontinued machines running: what matters

When a manufacturer is no longer fully active, parts sourcing becomes more specific: correct sizing, correct electrical ratings, and the right valve or group variant can make the difference between a quick fix and repeat faults. That’s why maintenance on older Brasilia machines often focuses on replacing wear parts early and keeping critical hydraulic and heating components within spec.

Typical Brasilia spare parts you can source

Exact parts depend on the model, but common service categories for commercial espresso machines include:

Group and brewing parts

  • Group gaskets, shower screens, dispersion parts

  • Portafilter components, filter baskets, screws and small hardware

Steam and hot-water valve parts

  • Valve rebuild components, seals, springs, stems

  • Steam tips and hot-water outlet parts

Hydraulic components

  • Solenoid valve parts (coils, plungers, seals—model dependent)

  • Non-return/check valves, anti-vac parts, restrictors

  • Hoses, fittings, O-rings and sealing washers

Pumps and pressure control

  • Pump-related parts (where applicable)

  • Pressure switches, OPV/expansion/relief components, safety valves

Heating and temperature

  • Heating elements, boiler fittings and service parts

  • Probes/sensors, thermostats and safety cut-outs

Electrics and controls

  • Switches, keypads/buttons, relays/contactors

  • Control electronics (model dependent) and wiring-related parts

Why correct parts selection matters

Using the correct replacement parts helps maintain:

  • stable pressure and repeatable extraction

  • strong steam performance and faster workflow

  • leak-free operation and safer temperature/pressure protection

  • fewer repeat repairs, especially on older machines