The shower screen on this page is one of the most commonly espresso machine shower screens used in commercial espresso machines. For instance on all E61 types of brewing groups. This specific shower screen has been made by the Italian company IMS Filtri. The IMS part reference for this item is IMSDR306. Note: this is not a competition shower screen.
This shower screen has been made partially from pressed stainless steel and stainless steel mesh. The pressed sections are A shaped and underneath is stainless steel mesh. The outer diameter of this shower screen is 60mm and the height is 17mm.
You can find this shower screen on espresso machines such as Casadio Dafne, Casadio Undici, ECMMichelangelo, ECM heildeberg Mechanika, Faema E61, Faema E61 Legend, Grimac Zola I, San Remo Treviso, San Remo Verona, all Vibiemme groups, La Scala Butterfy and so on. The complete model list and part references can be found in the extra info tab.
Looking for similar items or different specifications for this Shower with net and rays caulked 60mm?
Explore our full range in the Casadio, Faema, Grimac categories
*
This part is compatible to the original part number. Part numbers are always leading.
BFC
Bezzera
Brasilia
ECM
Expobar
Faema
Grimac
La Pavoni
La Scala
San Remo
Vibiemme
Brasilia
Century
Gradisca
Portofino
Casadio
Dafne
Dieci
Dodici
Quindici
Undici
Country of manufacturing
Made in Italy
Faema
Compact
Due
Due A
Due S
E61
E61 Jubile
E61 legend
E64
E66
E71
E91
E92
E97
E98
Emblema
Emblema A
Emblema S
Emblema restyling A
Emblema restyling S
Enova
Enova S
Express
Faema E61 Jubilé A1
Faema E61 Jubilé A2
Faema E61 Legend S1
Faema E61 Legend S2
Faema E61 Legend S3
Smart
Smart A
Smart A restyling
Smart S
Smart S restyling
Star
Stylema A
Stylema S
Teorema A
Teorema S
This contact thermostat has a shut off temperature at 165 °celcius. In this case it is a manual espresso machine thermostat. That means that it needs to be pushed manually to reset. With a automatic one it will reset itself.
On the bottom of this thermostat is a M4 male screw thread. You can screw the thermostat into a boiler for instance. For a brewing...
This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut.
This...
If the touch panel unit of your Vibiemme Replica and the Vibiemme Cubo espresso machine is broken, you likely need a new one. The specific model is made by Italian manufacturer Gicar (9.9.08.71G). This specific model doesn’t have a finished front, seen it is installed behind a metal plate with holes in it for the push buttons. The push buttons do have...
This Vibiemme RACCCASUTEPI chrome plated drain sleeve is unique for e E61 style brewing group. Vibiemme is the only espresso machine manufacturer who uses this principle. This is being used for the Lever as well for the Solenoid brewing group. Instead of the screw in drain sleeve, as being used by brands like Faema, Bezzera, La Pavoni, La Scala and...
The filterbasket on this product page is made by the Italian company IMS Filtri. This double filterbasket is from their Precision/competition line of filterbaskets. This model of filterbasket is called B702TH26.5M
The basket itself is for 2 coffee. The outer diameter is 70mm and the height is 26,5mm. There are 641 holes in the bottom of the filter basket,...
The single filterbasket model shown on this page is mainly used on Astoria and Wega espresso machines. Note: this basket can be used on any portafilter which has a similar 70mm outer diameter filterbasket. This single coffee filterbasket has been made by the Italian filterbasket manufacturer IMS Filtri, their reference number for this item is CM1T007....
One of the most universal items. The male brass plug. The plus on this page can be found in the catalogue of a variety of espresso machine manufacturers like Astoria, Faema, La Spaziale and Wega.
This specific plug has a male ¼”BSP-G thread. The height of this plug is 13 mm and the wrench size for this plug is 17mm.
