If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega, La Pavoni, Brasilia And BFC.
This specific group locking gasket is not suitable for the Faema E61 and Faema E61 legend brewing groups. The gasket will stick out the sides on the bottom
If you have questions about a part your looking for, don’t hesitate to contact us.
12-313-L-1186384
6 Items
Data sheet
Brand
Bezzera
Brasilia
Grimac
La Pavoni
Royal
San Remo
Vibiemme
Wega
On this page you will find a solenoid valve made by the Italian company ODE. The solenoid valve is a 2 way solenoid valve. The connections are both ¼”BSP in a female form. The orifice on this solenoid valve is 1,5mm.
the maximimum working pressure is 30 bar. The temperature range of this solenoid valve is -10°C up to a 140°C....
The water inlet valve shown on this page is suitable for a variety of La Cimbali and Faema espresso machines. The part references for this item are for the Cimbali the reference is 952706030 and for Faema 952-706-030
This valve is complete and ready to install, including the 24V water inlet solenoid valve.
You can use this water inlet valve on the La...
The portafilter gasket model on this page is mainly used on Astoria and Wega espresso machines. But this gasket is not made from NBR but from food safe silicone. The Astoria part reference for this item is 12217 and the Wega part reference for this item is.
The gasket has a outer diameter of 72mm a inner diameter of 56mm and a thickness of 8mm. This...
The selector switch on this page can be used on various La Cimbali espresso machines. This switch has been made by the Italian switch company Giovenzana. The Cimbali part reference for this item is 532-004-300/ 532-004-308/ 532-004-310.
This selector switch has been rated up to 16A at 690V. There are 2 positions 0 and 1. The switch knob shaft is 5x5mm....
The item on this product page is a OEM/Original Elektra spare part. This compression spring is used in various Elektra brewing groups, it is a filter locking spring. The Elektra part reference for this item is 01242035
The OEM compression spring has a outer diameter of 20mm. The length of this spring is 19mm.
You can use this compression spring on...
This screen mesh is used to de clump the ground coffee coming out of the coffee grinder. These screens can be fragile and can get damaged during cleaning. You normally use this wire screen in combination with the sealing gasket. This item is a OEM/original spare part and the part reference number is: 300000020.
The screen mesh can be used on the...
This electronic display on this page is used in Eureka and Nuova Simonelli coffee grinders. This item is only suitable for the coffee grinder model Mythos.
The part contains the display and the 5 push buttons for the dose settings. This item doesn’t come with the membrane.
The part number for Nuova Simonelli is 15030011 and the Eureka part number...
The dosing device on this product page can be used on various Vibiemme espresso machines. The corresponding Vibiemme part reference for this item is ELETDOS30. This item has been made by the Italian company Gicar and has their part reference of 9.1.23.10G00.
The unit has the name of 30 MICRO ST./C NO SIC and is a 230/240V unit. This item has been made in...
