The sight glass gasket on this page can be used with a variety of espresso machine brands. Such as Royal, Grimac, Astoria, Wega, Victoria Arduino and BFC.
This gasket is made from the gasket material EPDM. The outer diameter of the gasket is 16mm, the inner diameter is 10mm and the height is 8mm. The sight glass does have a edge on it. The gasket has been made in Italy.
Looking for similar items or different specifications for this Sight glass gasket 16x10x8mm?
Explore our full range in the Water level, Astoria, Grimac categories
*
This part is compatible to the original part number. Part numbers are always leading.
The item on this page is silicone grease made by the company Molykote. This type of silicone is called Molykote 111 compount. This silicone grease is NSF certified and can be used in drinking water systems.
Maintaining your espresso machine properly is one of the most important things to keep your espresso machine in good condition. This means lubricating...
The grease on this product page is made by the German company Kluber. The type of grease is called Klubersynth UH1 14-151. This is a food safe grease which is ideal to use on components such as steam and water valves.
The grease is packed in a tube of 45grams. The temperature reach of the grease is minus 45 degree and + 120 degree Celsius. The grease has...
The item on this product page is a compression spring which can be used on various espresso machine models of Vibiemme and ECM Heidelberg. The ECM Heidelberg part reference number of this compression spring is P6003.7. The Vibiemme part reference numbers are MOLLARAVUPLO and MOLLARUVAPLO.
This compression spring is made from stainless steel. The...
Brass fittings used on espresso machines are generic items, seen they are used in quite a lot of coffee machines. This specific model is a nut with a 3/8” BSP-G thread with a height of 6mm. The wrench size used for this item is a 21.
Which models use this 3/8” BSP-G nut.? Well you can find this nut with brands like: Gaggia, Saeco, Victoria Arduino,...
On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special.
This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a Vibiemme...
On this page you will find a colourful double scale manometer which is suitable for various Grimac espresso machine models. The Grimac part reference number for this item is 1250200033-GR034S
The left side shows the pump pressure from 0 to 15 bar and on the right side the boiler pressure from 0 to 2.5bar. The body of this pressure gauge has a diameter of...
The level probe on this page is made by the Italian company Gicar. This level probe is used in a variety of espresso machines such as San Remo, Grimac and Astoria. The Astoria reference is 20258, the Grimac reference is GR212 and the San Remo part reference is 10112042. The Gicar part reference for this item is 9.0.81.02G
The level probe shown on...
The o ring on this product can be used on various espresso machine brands such as San Remo, Elektra, Spaziale, Victoria Arduino and Brasilia. The part reference numbers can be found in the extra info tab on this product page.
This o ring is made from EPDM. The cord diameter is 2,62mm, the internal diameter is 47,30mm. This item has been made in Italy....