×

SHOPPING FROM

IMS E61 style shower screen

50-459-L-1460201

>18,14 € VAT incl.
14,99 € without VAT

This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....


In Stock

0
0/5 - 0 reviews
 Calculate Shipping Cost

    Specifications

    This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM.

    The body of this shower screen is 56,5mm and has a border diameter of 60mm. The wall height externally of this IMS shower screen is 17mm. This specific IMS filter has a hole pattern of 98 holes which have a diameter of 3mm. The finer filter membrane in the shower screen has a diameter of 200µm. This model of shower screen is held in place due to the friction of the portafilter gasket in the brewing group.

    As mentioned before this is shower screen which is quite common. You will find this screen with espresso machine manufacturers like: Bezzera, BFC, Brasilia, ECM, Faema, Grimac, Kees van der Westen, La Scala, Rocket, San Remo, Vibiemme and Wega.

    Do always verify the dimensions of the shower screen to be certain that you are ordering a correct matching shower screen. Seen not all brands use 1 type shower screen on their espresso machines.


    Extra Info

    Shower screen ø (mm)60
    Type shower screenWithout mounting hole
    BezzeraB2000-AL, B2006-AL, Galatea
    FaemaCompact, Due, Due A, Due S, E61, E61 Jubile, E61 legend, E64, E66, E71, E91, E92, E97, E98, Emblema, Emblema A, Emblema restyling A, Emblema restyling S, Emblema S, Enova, Enova S, Express, Faema E61 Jubilé A1, Faema E61 Jubilé A2, Faema E61 Legend S1, Faema E61 Legend S2, Faema E61 Legend S3, Teorema S, Teorema A, Stylema S, Stylema A, Star, Smart S restyling, Smart S, Smart A restyling, Smart A, Smart
    La ScalaButterfly, Carmen, Eroica, Iris, Norma, Tosca
    San RemoAmalfi, Capri, Pisa, Torino, Treviso, Treviso LX, Verona, Verona RS
    VibiemmeChimaera, Cubo, Domobar, Domobar Junior, Domobar Super, Dosaplus, Evolution, Kometa, Lollo, Mercury, Minimax, Replica, Revolution, Silver
    WegaAiry, Antares, Atlas, Colosseum, Combinova, Espressa, Euro-2000, Formula-Milano, Junior, Mininova, Nova, Novecento, Orion Eco, Polaris, Sphera, Syntesis, Vela
    Type partCompetition shower screen
    BrandFaema, Casadio, ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Wega, Brasilia
    part numberBFC 0520080, Royal 0520080, Bianchi 16022711, Casadio 457560000 , Faema 457560000, ECM C519900103, ECM heidelberg C519900103, Expobar 75000010, Faimac DOC001, Fiorenzato A2200031, Futurmat 02610004, Gaggia Spagna 02610004, Italcrem 02610004, Mairali 02610004, Visacrem 02610004, Grimac 1070100007-GR761, Orchestrale D27104, Promac 80230310, Reneka AT5471022, SAB italia SVTMD003 , San Remo 10052120, Scala C-0322, Vibiemme FILTDCREGR, Fiamma 5.0.025.0010, Isomac IS000412, Bezzera 5470512, Brasilia 04214.0.40.01, Pavoni 330677, Victoria Arduino 17010003, Wega WY27104, Futura 200088, IMS E61200IM
    Country of manufacturingMade in Italy

    Reviews (0)

    No customer reviews for the moment.


    Only users who already bought the product can add review.

    Frequently Asked Questions

    Well that answer is pretty simple, no it isn’t. The original valve works as following, when you turn the shaft inwards the valve pin will push a gasket holder. The steam can go out, close it again and no steam can go out. In the case of the modern E61 valves is that behind the gasket holder is a small stainless steel ball with a spring.

    From the beginning of the Faema E61 brewing group are basically no differences between the parts installed inside the brewing group. Parts such as the valve gaskets, springs, valve assemblies and portafilters have all remained the same. The biggest change is the small cleaning hole on the front of the brewing group. With the earliest models this hole didn´t exist.

    There are 5 types of boiler used on the Faema E61 espresso machine. The most well known is the double flanged model. You have on one side the heating element flange and on the other side the water level flange, both are out of production. These are held in place with aluminium boiler rings. For the single groups you have a boiler with a flange on one side.

    The next model is a stainless steel boiler, with one flange. This type of boiler is less common then the copper boiler above. There is also a later model stainless steel, which doesn’t have a removable flange. Both these boilers have corrosion issues, this has to do because of the stainless steel.

    The latest model is also a copper boiler, this boiler has a single heat exchanger(HX) in the middle. Most modern espresso machines have for each individual brewing group a individual HX.

    Yes it is, but this depends on various factors. The first thing is experience, seen this is a manual operated espresso machine it requires a lot more attention from the barista then a solenoid operated model. There you need to stop the brewing process manually. If you don’t have the experience you probably can’t hold up with the tempo which is required at such a bar. Then I would advice to go for the Faema E61 Jubilee, this is the solenoid operated version of the Faema E61 Legend espresso machine.

    We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.

    Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.

    They are both operated with a Ma-ter pressure switch with is fitted with a safety valve and with a relay. The older ones had a build on relay, but the latest ones have a separate relay.


    This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.

    The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.

    The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.

    Other Products

    This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

    Cookie preferences

    Functional cookies
    No
    Yes
    Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
    Cookie Provider Purpose Expiry
    PHP_SESSIDbrooks-parts.comThe PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.Session
    PrestaShop-#brooks-parts.comThis is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.480 hours
    Advertising Cookies
    No
    Yes
    These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
    Analytics cookies
    No
    Yes
    Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.
    Performance cookies
    No
    Yes
    These are used to improve the browsing experience and optimize the operation of the shop.
    Other cookies
    No
    Yes
    These are cookies without a clear purpose or those that we are still in the process of classifying.