Vibiemme Chimaera

The portafilter on this product page is a bottomless portafilter which can be used on a variety of Vibiemme brewing groups. This is the case for the commercial and the domestic espresso machine models. This portafilter has no spout, but a bottom which has been cut out. The ear orientation is 90 degree and the thickness of the ears is 5,5mm. The...

This dosing device Dosatura 3d5 Plus 3PID 240Vac, with the Gicar code 9.5.22.37G is being used for Vibiemme espresso machines (ELETDOSKIMREP). Mainly for the dual boiler espresso machines Vibiemme Replica and Vibiemme Chimaera. The dosing device runs on 240Vac with 50/60Hz and is suitable for Vibiemme espresso machines up to 3 brewing groups. If you are...

On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work? Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is...

Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....

The portafilter gasket shown on this page is used with various espresso machines of the Cimbali group and with Vibiemme espresso machines. the part reference numbers can be found in the extra info tab. This portafilter gasket has been made from NBR. The outer diameter is 74mm the inner diameter is 57,5mm and the thickness is 8mm. This gasket has 4...

On this product page you will find a parker 3 way solenoid valve which is slightly different then a conventional solenoid valve. This solenoid valve is mainly used on solenoid brewing groups of the brand Vibiemme. What makes it so different? This solenoid valve is pre-wired. The Parker part numbers of this item are 393134J and 393395J This solenoid valve...

The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....

The element on this product page is suitable for Vibiemme 2 group espresso machines (ELETRESMI3522). This specific model is suitable for the Vibiemme Replica and the Vibiemme Chimaera. The element can generate 3500W with 220V on 50/60Hz. The element has 4 poles, with a thread and bolt connection. The element has a copper heating element with a brass...

If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm models, a...