Filter by
Type part
more... less
Type
Price
€ €
Filter

San Remo Capri

San Remo Capri espresso machine parts

The San Remo Capri is one of the more basic espresso machine models of San Remo, simple but effective. This espresso machine works with individual heat exchangers for each brewing group.

This espresso machine is only available in a volumetric version, so you will have with every group a touchpanel with keys which hold a pre-set dosing setting. This makes making coffee and espresso a lot easier.

The San Remo Capri is available in a 1 and a 2 group version. Both the 1 group and the 2 group version are available in a 120V and a 230V version.

San Remo Capri espresso machine parts
Portafilter gasket 73x57x9mm red silicone Portafilter gasket 73x57x9mm red silicone

Portafilter gasket 73x57x9mm red silicone

The portafilter gasket shown on this product page is one of the most common sizes found on commercial espresso machines. But this gasket hasn’t been made from NBR as traditionally done, but from food grade silicone. You can find this portafilter gasket on brands such as Faema, Vibiemme, Bezzera and La Scala. This red silicone gasket has a outer diameter...
€4.52
compare
Quick-view
Gicar flowmeter 1/4D 1,15 connector with led Gicar flowmeter 1/4D 1,15 connector with led

Gicar flowmeter 1/4D 1,15 connector with led

The flowmeter on this page is one of the most commonly used flowmeters in espresso machines. This flowmeter has been manufactured by the Italian company Gicar, so also made in Italy. In the extra field tab next to this text you will see a entire list of compatibilities with other models and brands. This specific flowmeter does not come with a fixed wire,...
€55.65
compare
Quick-view
Steam and water valve spring bushing Valve shaft sleeve

Steam and water valve spring bushing

The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC. Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft. This bushing...
€1.00
compare
Quick-view
L Fitting brass 3/8" MM L Fitting brass 3/8" MM

L Fitting brass 3/8" MM

On this product page you will find a 3/8” L fitting. This is a generic item which can be used on a variety of espresso machines and own build projects. This L fitting a both Male 3/8”BSP-G fitting. The displayed item has a nickel finish, it is possible that you get a only brass version
€6.20
compare
Quick-view
Parker 3 way solenoid 110V 50/60Hz conical Parker 3 way solenoid 110V 50/60Hz conical

Parker 3 way solenoid 110V 50/60Hz conical

On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...
€92.40
compare
Quick-view
level probe 1/4" bsp-g 120mm level probe 1/4" bsp-g 120mm

level probe 1/4" bsp-g 120mm

the item on this product page is a boiler level probe. A level probe is used to measure the amount of water inside the boiler. This specific model of level probe can be used on various espresso machine brands such as San Remo, ECM Heidelberg, Quality espresso and Conti. The San Remo part reference number for this item is 10112064  This level probe...
€22.28
compare
Quick-view
Faema E61 group upper plug Faema E61 group upper plug

Faema E61 group upper plug

On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...
€4.10
compare
Quick-view
Spring for steam and water valve 10,5x32mm Faema P4 spring for valve

Spring for steam and water valve 10,5x32mm

This steam and water valve compression spring is one of the most used compression springs. You will find them with a variety of espresso machine brands such as Faema, Pavoni, La Scala, Vibiemme, la Marzocco and San Remo. The part references can be found in the extra info tab. This stainless-steel compression spring has a outer diameter of 10,5mm and a...
€1.10
compare
Quick-view
Brooks Cafelat red silicone portafilter gasket 73x57x8mm Brooks Cafelat red silicone portafilter gasket 73x57x8mm

Cafelat red silicone portafilter gasket 73x57x8mm

This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat. This gasket is made from food graded red silicone....
€4.36
compare
Quick-view
Silicone gasket 12.3x5.6mm Silicone gasket 12.3x5.6mm

Silicone gasket 12.3x5.6mm

This blind gasket can be found on a variety of steam and water valves. You can find this blind gasket with brands such as La Scala, Marzocco, La Carimali, San Remo, Vibiemme, La Pavoni and BFC. The part references can be found in the extra info tab. This gasket is made from red silicone. The gasket has a outer diameter of 12mm and a height of 5.8mm....
€0.86
compare
Quick-view
Lucifer solenoid valve 3 way base mounting 115V 50/60Hz Lucifer solenoid valve 3 way base mounting 115V 50/60Hz

Lucifer solenoid valve 3 way base mounting 115V 50/60Hz

The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model. This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...
€81.54
compare
Quick-view