Filter by
Type part
more... less
Type
Price
€ €
Filter

San Remo Roma

San Remo Roma espresso machine parts

On this category page you will find spare parts for the San Remo Roma espresso machine. This espresso machine is one of the basic models of the San Remo brand.

You can only find this model in a 2 group model, these brewing groups are of the iconic E61 type. These are not the manual ones, but the solenoid valve operated models. This model of the San Remo Roma is only available as a volumetric model, so equipped with a dosing device, touchpanel and flowmeters.

This espresso machine is referred as a dual boiler system. Seen the San Remo Roma it has one big boiler for water and steam and for each individual brewing group a additional boiler.

This espresso machine can be used globally seen this model can operate at 230V and 120V single phase and at 400V three phase

San Remo Roma espresso machine parts
Steam water valve shaft gasket holder Faema P4/No stop steam valve rod

Steam water valve shaft gasket holder

The item on this product page is a steam and water valve shaft, including gasket holder. This item can be used on various espresso machine brands such as Marzocco, San Remo, Vibiemme, La Scala, Faema, La Pavoni. The part reference numbers can be found in the extra info tab. This steam and water valve shaft has been made from low lead content brass. On...
€7.74
compare
Quick-view
Stainless steel filter 8.6x22.5mm Stainless steel filter 8.6x22.5mm

Stainless steel filter 8.6x22.5mm

The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
€2.77
compare
Quick-view
Filterbasket 2 coffee 12gr 70x21mm Filterbasket 2 coffee 12gr 70x21mm

Filterbasket 2 coffee 12gr 70x21mm

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Casadio, Brugnetti, ECM Heidelberg, San Remo, Faema, Vibiemme, La Scala, Grimnac. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T068. Note: this is not a competition...
€4.54
compare
Quick-view
O ring gasket 6x1.2mm O ring 6x1.2mm epdm

O ring gasket 6x1.2mm

The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
€1.10
compare
Quick-view
Flex pipe 450mm 1/4" ff conical base Flex pipe 450mm 1/4" ff conical base

Flex pipe 450mm 1/4" ff conical base

On this page you will find a stainless steel water hose. This hose can be used to connect the water mains to your espresso machine any other suitable appliance. Or in the case of a San Remo espresso machine it can be used to connect the outlet of the pump to the water inlet valve. This stainless steel flex hose has a overall length of 450mm and on each...
€23.52
compare
Quick-view
Cimbali Max and Cadet coffee hopper Cimbali Max and Cadet coffee hopper

Cimbali Max and Cadet coffee hopper

The hopper on this product page is a OEM/Original La Cimbali spare part. This hopper has the Carimali part reference numbers 803190035, 803-190-035, 965300000 and 965-300-000. This hopper does not come with the bottom shutter, nor with the hopper lid. This hopper has been made in Italy. You can use this hopper on the La Cimbali Max and the La Cimbali Cadet
€347.32
compare
Quick-view
Steamtube anti scorch clip Steamtube anti scorch clip

Steamtube anti scorch clip

The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube. This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with...
€1.92
compare
Quick-view
Parker 3 way solenoid valve 220/230V Parker 3 way solenoid valve 220/230V 50/60Hz conical

Parker 3 way solenoid valve 220/230V

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...
€77.78
compare
Quick-view
Wera shower screen screwdriver slotted Wera shower screen screwdriver slotted

Wera shower screen screwdriver slotted

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€11.50
compare
Quick-view
San Remo Verona lcd display

San Remo Verona lcd display

The display on this page is a OEM/Original San Remo spare part. The San Remo part reference for this item is 10112044. This display is used on the San Remo Verona and on the San Remo Roma.
€249.91
compare
Quick-view
Faema E61 filterholder suplement gasket 0,8mm Faema E61 filterholder suplement gasket 0,8mm

Filterholder suplement gasket 73x59x0.8mm

The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups. What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm. What does a paper shim do? Brewing group locking mechanisms wear due to...
€0.52
compare
Quick-view
SanRemo heating element...
  • New

SanRemo heating element 2700W 230V original

The heating element on this product page is a OEM/Original SanRemo spare part. This specific unit has the SanRemo part reference number 10455186B. This specific heating element produces 2700W at 230V and has 6 connecting poles. The heating element has in total a immersion depth of 330mm. In the middle of the flange, which has a diameter of 1”1/4, is a...
€167.46
compare
Quick-view