Gaggia Tell

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal diameter...

This flat EPDM gasket is used on only 1 brand of espresso machine. The brand La San Marco. This gasket is used in the water inlet tab and the steam and water valves. The La San Marco part reference for this gasket is 109024 and CTSGUA0110. This flat EPDM gasket has a outer diameter of 15mm and a central hole which has a diameter of 5,5mm. The thickness is...

The o ring on this page can be used on a variety of espresso machine brands with various applications. You can find this o ring with brands such as Faema, Nuova Simonelli, Pavoni, Victoria Arduino and Gaggia. This o ring has been made from silicone. The cord diameter is 1,78mm and the internal diameter is 3,89mm. This o ring has been made in Italy. This o...

The product on this page is a gasket, a copper one. This copper gasket is a flat gasket, so not a compression gasket. This flat copper gasket is used in a variety of espresso machines and applications. You mainly see them in the category of steam and water valve or boiler components. This gasket has a outer diameter of 22mm a inner diameter of 17 and a...

This brass nut has a female thread of 3/8” bsp and a height of 6mm. The outer size is 21 or 24mm, this can vary sometimes and can’t be selected. So where is this brass hex nut used in espresso machines? You can find this model hex nut mainly on water and steam taps of brands like, Royal, La Spaziale,  La Scala, Nuova Simonelli, Victoria Arduino and La...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

On this product page you will find a rectangular shaped pressure gauge. This type of pressure gauge can be used on the Gaggia Tell espresso machines. This pressure gauge is suitable as a boiler pressure gauge. The pressure range goes from 0 to 3 bar. The connection at the back is a male ¼” BSP-G thread. The front of the manometer is 56x79mm....

This external circlip is used on various espresso machine brands such as Marzocco, Faema and Gaggia. The Faema part reference for this seeger ring is 4081050302 and for Marzocco it is L165/3. This seeger ring is used for 16mm shafts. The internal diameter is 14,7mm. The thickness is 1mm and it has been made according UNI 7435 - DIN 471. This item is made...

On this product page you will find a rectangular shaped pressure gauge. This type of pressure gauge can be used on the Gaggia Tell espresso machines. This pressure gauge is suitable as a pump pressure gauge. The pressure range goes from 0 to 15 bar. The connection at the back is a male ¼” BSP-G thread. The front of the manometer is 56x79mm....

This heating element gasket has a triangular shape and is suitable for various Gaggia heating element types. There are 2 types of triangular shaped heating element flanges. This is the small one This gasket is 66x66mm and has a thickness of 2mm. The internal hole is 30mm.

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...