The valve shaft gasket on this page is used with basically every steam and water valve manufactured for Astoria and Wega espresso machines. This gasket makes sure that there doesn’t leak any steam or water past the shaft of the valve. The Astoria part reference is 12204 and the Wega part reference is WY12204
This gasket has been made out...
€1.24
Filter for pump 3/8" M 3/8" M
The item on this page is a espresso machine pump filter. Not suitable for a vibration pump. This item can be used on basically every espresso machine pump which has a 3/8” BSP-G Thread. But you will see this type of pump filter on Astoria and Wega espresso machines. The part number 56116 for Astoria and for Wega the number WY56116.
This filter has...
€8.91
Procon clamp ring pump 180 L/H
The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B
The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...
€179.36
Solenoid valve connector
The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other.
These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm.
This solenoid valve connector can be basically...
€2.77
Astoria Wega gasket 15x4x4mm
This product is a flat EPDM gasket used in steam and water valves and water inlet valves of the Astoria CMA group. So you will find them in Astoria and Wega espresso machines. The Astoria part number for this item is 12203 and the Wega part number is WY12203.
This gasket has been made from EPDM. The outer diameter of this gasket is 15mm. the inner...
€0.71
Astoria Wega adjustable SCNR valve 1/4" x 3/8"
The expansion and non-return valve on this page is one of the most standardized items used in espresso machines manufactured by the Astoria CMA company.
The Astoria part reference is 20361 and of the Wega the part reference is WY20361
This non return and expansion valve has 1 inlet and 2 outlets. The inlet is a male ¼” BSP-G, the...
€40.91
Astoria Wega tap gasket 14x7x5mm
The item on this product page is a lip seal which is used on a water inlet system. You can find this lip seal with various Astoria and Wega espresso machines. The Astoria part reference for this item is 12205 and the Wega part references are W10527 and WY12205.
This lip seal is used to seal off the manual filling shaft. The outer diameter is...
€2.77
Astoria double portafilter
The portafilter on this product page is suitable for a broad selection of Astoria espresso machine models. The Astoria part reference for this item is 27311051 and 8327311051R
This double portafilter has a open spout, this spout has a thread of 3/8” BSP-G. The orientation of the ears is 45 degree. The portafilter does have a ear...
€50.65
O ring silicone 47.22x3.53mm FDA
This o ring is used on Astoria CMA group espresso machine brewing groups. The Astoria part number for this item is 12304 and the Wega part number is WY12304.
This item is made from fda graded silicone. The thickness of the cord is 3,53mm and the internal diameter is 47,22mm.
You can use this on the Astoria brewing groups used in the models Astoria Adria,...
€1.72
Lucifer solenoid 3 way base mounting 220/240V 50/60Hz
The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve. Parker has listed this part under 471012 and 471013
The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6
The valve in question is a 3 way solenoid...
€78.48
group gigleur M5x1 hole ø 0.7 mm
The product on this page is a gigleur/nozzle for inside a brewing group. This type of nozzle can be used with brands from the Astoria CMA group. For Astoria the part number is 10300001 and for Wega the part number is WY10300001
This specific gigleur is made from brass and has a central hole of 0,7mm. The threads used are a M5 with a pitch of 1mm....
€2.77
Shower screen 51,5mm
The shower screen on this page is made by the Italian company IMS Filtri, no this is not a competition shower. But they also make standard shower screens. This shower screen can be used on a variety of brewing groups. Like on the ones of Reneka, Carimali, Bezzera, Grimac, Astoria, Wega and Elektra.
The external diameter of this shower screen is 51,5mm...
€5.46