Astoria Divina
The push button unit on this page is a OEM/Original Astoria Divina spare part. The part reference for this item is 18371018.
This push button panel are basically 2 normal switches. So you can start the brewing process and stop it by pushing it again.
€69.44
Astoria Divina touchpanel Timer 230V
The dosing device/level regulator on this page is a OEM/Original Astoria spare part. This push button panel is used on various models on the Astoria Divina espresso machine. The Astoria part reference for this item is 21276. The Gicar part reference number for this item is 9.2.20.56
This touchpanel has in total 4 keys. The first 2 are pre-set volumetric...
€1,030.54
Astoria Wega steam/water valve fitting
The valve fitting on this page can be found on almost every Astoria and Wega steam and water valve. This coupling holds the steam axle and valve gasket holder in place when in use. The item screws into the valve body. The Astoria part number for this item is 25678001. The Wega part number for this item is WY25678001
You can find this fitting on...
€17.53
Boiler safety valve 3/8" 1.8 bar CE-PED
The boiler safety valve shown on this page can be used on wide selection of espresso brands such as Brasilia, Wega, Astoria, Grimac, Cimbali, Faema, Marzocco and Carimali. The part references can be found on the extra info tab.
This boiler safety valve has a male 3/8” BSP-G thread. The safety valve has been set at 1,8 bar, this is not adjustable. When the...
€22.82
Wera shower screen screwdriver slotted
In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.
But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€11.50
Stainless steel filter 8.6x22.5mm
The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega.
This stainless steel water filter has a outer diameter of 8,5mm...
€2.77
Fitting brass 1/4" x 1/4" MM
The item on this page is a double male fitting. The threads used on each side are ¼” BSP-G threads. They are straight and not conical.
This type of fitting is used with various brands such as San Marco, Grimac, Astoria, Wega, La Spaziale, Nuova Simonelli, Pavoni, Victoria Arduino and Gaggia.
The complete reference and model list can be...
€3.05
Filter for pump 3/8" M 3/8" M
The item on this page is a espresso machine pump filter. Not suitable for a vibration pump. This item can be used on basically every espresso machine pump which has a 3/8” BSP-G Thread. But you will see this type of pump filter on Astoria and Wega espresso machines. The part number 56116 for Astoria and for Wega the number WY56116.
This filter has...
€8.91
Wega heating element 2 grp 3400W 230/380V
The heating element on this page can be used on a variety of espresso machine brands like Wega and Astoria. The Astoria part number for this item is 17059 and the Wega part number for this item WY17059
This heating element is used for 2 group espresso machines. The immersed length of the element is 320mm. It produces 3400/3700W at 230/240V and...
€116.69
Brass washer 18x12x1mm
On this page you will find a brass washer which is suitable for the Astoria and Wega water level assembly. This washer makes sure that the gasket doesn’t tear when the sight glass nut is tightened. This washer has the Astoria reference 25652 and the Wega part is WY25652
This gasket has a outer diameter of 18mm a inner diameter of 12mm...
€1.66
Astoria/Wega lower water level fitting
The item on this page is a lower water level fitting for the Astoria and Wega espresso machines. This item is OEM/Original spare part. The Astoria part number for this item is 53001 and the Wega part number is WY53001
This lower water level fitting has been casted out of brass and is machined afterwards. The fitting which is used to attach the...
€36.74
Steamtube anti scorch clip
The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube.
This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with...
€1.92