The portafilter gasket on this page is a alternative to the original portafilter gaskets made by the Astoria CMA group. The design of this portafilter gasket is similar to the original and is also made in Italy. The corresponding Astoria part number is 12217 and the one of Wega is WY12217
The outer diameter of this portafilter gasket is 72mm, the inner diameter is 56mm and the thickness is 8mm. Internally there are 3 cuts.
You can use this gaskets on the brewing group Astoria Divina, Astoria Gloria, Astoria Perla 3D, Astoria Rapallo, Astoria Brava and on the Wega Concept and Wega Venere.
The pump pressure gauge on this page can be used on various La Cimbali espresso machine models. The Cimbali part reference for this item is 445-028-000.
The manometer is suitable for the pump pressure. The range on this manometer goes from 0 to 16 bar. The body diameter is 57mm as well for the rim diameter. The connection at the back is a...
The item on this page is a capacitor made by the Italian company Ducati Energia. This capacitor produces 14µF. The part reference numbers for this item are41610.2164 and 41610.2164+... .
This capacitor has in total 4 connectors which are 6,35x0,80mm. The capacitor itself has a diameter of 36mm and a length of 70mm. On the bottom is a M8 nut for fixing the...
On this product page you will find a stainless-steel water and steam valve compression spring. This spring has multiple purposes. It holds the steam and water wand at a fixed location and keeps pressure on the PTFE ball gasket. This compression spring can be used with the brands Casadio (485061010 ) Cimbali (485061010) and Faema (485061010)
This...
Correct wiring for every electrical installation is the most important thing. So using the correct type of electrical wiring is really important. For Espresso machines you can not use standard wiring due to the higher air and contact temperatures inside the espresso machine.
That is why the insulator of the wiring is made from silicone, which is...
The brass washer on this product page is used in various espresso machines made by Astoria and Wega. The Astoria part number for this item is 25655 and the Wega part number is WY25655.
This brass washer has a outer diameter of 12mm a inner diameter of 8mm and a thickness of 1mm. This washer is used to spread the pressure of the steam and water shaft...
To hold a coffee filterbasket in it’s place there is always a spring installed in the portafilter. In each modern portafilter is a recess machines to accommodate such a spring. The type on this product page can be used on brands such as Carimali, Casadio, San Marco, San Remo, Vibiemme, Bezzera, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli,...
This blind gasket is used with Rancilio espresso machines to seal off the steam valves. The Rancilio part number for this item is 36301105. The blind gasket on this page has a outer diameter of 13 mm and a thickness off of 4mm.
The models which use this specific spare part are the Rancilio Classe 10, Rancilio Classe 9, Rancilio Classe 8, Rancilio...
